Specifications 1. made from synthenic latex, palents fiber and fillinf material

2. good compressibility and coefficient of resilience

        The inside of gasket can properly well to meet oil, that make up of the short coming that procession maching precisionis not enough, which affected self-sealing. Vulcanized Non-asbestos latex sheet, it is by vulcanizing, and has smooth face and high density, and can be cut into all kinds of gasket directly.         It is used in Automobile, Farm machinery, Motors, Engineering, etc. It can be used in Oil System and Water Supply System at temperature 150 °C.  

Item	Non-asbestos latex paper	Vulcanized Non-asbestos Latex Sheet
Density g/cm3	0.9~1.1	1.2~1.4
Tensile strength ≥%	12.7
Compressibility ≥%	15±5
Recovery ≥%	45
Stress relaxation ≤%	35
Weight increase (in oil) ≤%	35
Thickness increase (in oil) ≤%	15

  Non-Asbestos Jointing Sheet is made of good long asbestos fiber, oil-resistance synthetic rubber, heat-resisting packing material compound heating and compression molding it and used as sealing material in the joints of oil pipeline and sealing gasket used on automobiles motorcycles, agricultural machines, engineering machinery engines it widely used as the sealing gasket material for the equipment in kerosene, petrochemical, alkali,acid, solvent, fuel oil, petroleum-based lubricating oil and other mediums.     Dimension  

Width :      500mm, 1000mm

Length :     500mm; 1000mm; 1200; 1300mm

Thickness :  0.6 - 2.0mm

If you are interested in our products, please contact me in Tragemanager and in Email and I will reply as soon as possible. My target of service is to satisfy your requirements. My Email:sales02 at rilson.com.cn