Zhejiang Ailipu Technology Co., Ltd.
- Model No.: ALP-P05
- Min. Order: 1 Set/Sets
- Transportation: Ocean,Land,Air
- Packaging: PACKING IN CARTON OR WOODEN BOX
- Supply Ability: 1000 SETS/MONTH
Postitve displacement pump such as metering pump will over transform liquid working under low pressure system.Using back-pressure valve on the discharge piping of metering pump can avoid this problem.
Feature
protection and smooth system flow.
*Protection of pipes, meters, valves and instrumentation from pulsation and vibration.
*Used together with back pressure valve can make pressure fluctuation close to zero.
*Limit damaging pressure surges caused by pump start-up and shut-down.
*Prevention of foaming and splashing.
*Allows more accurate readings when pumping through mass flow meters & other instrumentsNo dynamic seal, no leakage
and easy maintenance. .
pulse impact to the piping and system. There is the pressure gauge on the damper will show the detail piping pressure. In
general removing pulsation reduced the energy usage to transmit liquid over distances.The damper needs to be installed
right above of the pump discharge end.
Advantages
Increases system efficiency and pump component life Ineases safety by reducing pressure surges.Ineases safety by reducing pressure surges.
Where is a Pulse Dampener installed ?
For best performance a Pulsation Dampener should be installed at the start of the pipe down which the flow has to be forced or
when the dampener is to perform as a suction side acceleration head loss reducer, then the installation is after the suction supply
line at the entry to the pump inlet check valve. A pulsation dampner is generally installed as close to the source of the pulsation as possible.
- Business Type : Manufacturer
- Product/Service : Solenoid Dosing Pump , Mechanical Diaphragm Dosing Pump , Plunger Metering Pump , Hydraulic Diaphragm Metering Pump , Chemical Injection Package , Polymer Dosing System