Main Specification
JZM-A series Automatic Chemical Diaphragm Dosing Pump
* Output pressure is less than 12bar, suitable for small flow. The measurement can be up to +/-1%
* It can Transport high-viscosity mediums, corrosive liquid and dangerous chemical goods
* Power-off seal, no leakage
*The flow can be controlled via adjusting the length of stroke or the motor frequency.
*Ambient temperature: -10~40
* Lower price, simple structure, convenient maintenance, better performance-price ratio
Capacity:82~1200L/H
Pressure:3.5~10 BAR
Speed:36~180 spm
Length of stroke: 12mm
Suction/discharge:DN15~DN40
Pump head material:PVC,PTFE,304,316
Diaphragm: PTFE
Motor Power: 220V /380V 0.55kw 1400rpm 3 phase 50Hz(others are available)
Digital controller: control flow by changing the frequency
MOde | (L/h) | (Mpa) | (min-1) | (mm) | (mm) | (mm | (w) | (kg) |
JZM-A82/1 | 82 | 1 | 36 | Ф110/70 | DN15 | |||
JZM-A167/1 | 167 | 72 | ||||||
JZM-A237/1 | 237 | 102 | 220V/380V | |||||
JZM-A334/1 | 334 | 135 | DN25 | 0.55KW | ||||
JZM-A410/1 | 410 | 180 | 1400RPM | 30-40 | ||||
JZM-A460/0.7 | 460 | 0.7 | 144 | Ф110/80 | 12 | 3-50HZ | ||
JZM-A580/0.7 | 580 | 180 | IP55/F | |||||
JZM-A656/0.35 | 656 | 0.35 | 102 | Ф162/115 | 0.75kw | |||
JZM-A940/0.35 | 940 | 144 | DN40 | |||||
JZM-A1200/0.35 | 1200 | 180 |
* Mechanical actuated diagragm design, easy operation and with the convenience maintenance
* Changeable eccentric drive, no leakage with security delivery
* Rugged construction designed to withstand tough environments
* Oil bath lubrication for all drive components
* Various pump head material (PVC,PVDF, SS304, SS316 etc.) to meet different solution needs
* Available with the manual control and digital control model
* Manual stroke adjustment
* Stroke actuator with 4-20mA signal
* Digital controller with 4-20mA signal
* The pump can be used to deliver the solution which is high-viscosity, corrosive and dangerous
* Diaphragm rupture detection system (double diaphragm) is optional
A: We are factory, and our factory has the independent research and development capacity
A: Generally it is 3 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer sample but it must be paid
A:TT, LC. etc.....