This is a mechanical accuracy dosing pump which is enable to protect the liquid impureness and maintain no-leak situation. It is suitable for metering and dosing condition in the low pressure range, which is able from 1Mpa to 0.3Mpa. However, this pump can be used in cooling circuits, waster water treatment, paper industries, plastic industries and so on.
* Mechanical actuated diaphragm, no leakage structure
* The material of pump head can be PVC, PTFE, PVDF and SS316
* It is used for corrosion resistant liquid
* It can be installed on the medicine groove
* Easy installation and simple repair and maintenance
* It is safe to operate it
* Capacity can be adjusted from 0 to 100% during operation
* It can be equipped with digital controller with remote control
MOde | (L/h) | (MPa) | (mm) | (min-1) | (mm) | (inch) | (kg) | (w) |
JWM-A6.5/1 | 6.5 | 1 | 2 | 54 | φ65 | ID:9od:15 | 7.3 | 2.5UF 40W 220V/50HZ |
JWM-A12/1 | 12 | 2 | 108 | |||||
JWM-A24/1 | 24 | 4 | 90 | |||||
JWM-A32/1 | 32 | 4 | 135 | 7.4 | ||||
JWM-A42/1 | 42 | 5 | 135 | |||||
JWM-A60/1 | 60 | 5 | 150 | |||||
JWM-A80/0.5 | 80 | 0.5 | 4 | 150 | φ84 | 8.5 | ||
JWM-A90/0.5 | 90 | 5 | 135 | |||||
JWM-A100/0.5 | 100 | 5 | 150 | |||||
JWM-A110/0.3 | 110 | 0.3 | 4 | 150 | φ94 | |||
JWM-A120/0.3 | 120 | 5 | 135 | |||||
JWM-A150/0.3 | 150 | 5 | 150 |
A: We are factory, and our factory has the independent research and development capacity
A: Generally it is 3 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer sample but it must be paid
A:TT, LC. etc.....