Introduction
Dosing pump, as the special pump in the industry, even this is a small part in the dosing system, but this has been treated as the most important and haert part in a system. The dosing pump not only delivers lots kinds of chemical liquid, but also with the quantitative dosing to achieve the system's dosing function. So nowadays, more and more industries line need the dosing pump for the intelligent & integrative operation.
Specification
JZM-A series Electric Operated Chemical Diachragm Dosing Pump
* Output pressure is less than 12bar, suitable for small flow. The measurement can be up to +/-1%
* It can Transport high-viscosity mediums, corrosive liquid and dangerous chemical goods
* Power-off seal, no leakage
*The flow can be controlled via adjusting the length of stroke or the motor frequency.
*Ambient temperature: -10~40
* Lower price, simple structure, convenient maintenance, better performance-price ratio
Capacity:82~1200L/H
Pressure:3.5~10 BAR
Speed:36~180 spm
Length of stroke: 12mm
Suction/discharge:DN15~DN40
Pump head material:PVC,PTFE,304,316
Diaphragm: PTFE
Motor Power: 220V /380V 0.55kw 1400rpm 3 phase 50Hz(others are available)
Digital controller: control flow by changing the frequency
MOde | (L/h) | (Mpa) | (min-1) | (mm) | (mm) | (mm | (w) | (kg) |
JZM-A82/1 | 82 | 1 | 36 | Ф110/70 |
|
DN15 |
|
|
JZM-A167/1 | 167 | 72 |
|
|
|
|||
JZM-A237/1 | 237 | 102 |
|
220V/380V |
|
|||
JZM-A334/1 | 334 | 135 |
|
DN25 | 0.55KW |
|
||
JZM-A410/1 | 410 | 180 |
|
1400RPM | 30-40 | |||
JZM-A460/0.7 | 460 | 0.7 | 144 | Ф110/80 | 12 | 3-50HZ |
|
|
JZM-A580/0.7 | 580 | 180 |
|
IP55/F |
|
|||
JZM-A656/0.35 | 656 | 0.35 | 102 | Ф162/115 |
|
|
0.75kw |
|
JZM-A940/0.35 | 940 | 144 | DN40 |
|
||||
JZM-A1200/0.35 | 1200 | 180 |
|
* Mechanical actuated diaphragm design, easy operation and with the convenience maintenance
* Changeable eccentric drive, no leakage with security delivery
* Rugged construction designed to withstand tough environments
* Oil bath lubrication for all drive components
* Various pump head material (PVC,PVDF, SS304, SS316 etc.) to meet different solution needs
* Available with the manual control and digital control model
* Manual stroke adjustment
* Stroke actuator with 4-20mA signal
* Digital controller with 4-20mA signal
* The pump can be used to deliver the solution which is high-viscosity, corrosive and dangerous
* Diaphragm rupture detection system (double diaphragm) is optional
A: We are factory, and our factory has the independent research and development capacity
A: Generally it is 3 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer sample but it must be paid
A:TT, LC. etc.....