The biggest flow rate of JXM-A type pumps can reach to 500L/H and the pressure of them can reach 1.2 Mpa( specification – dependent ),This design has significantly decreased the fluctuation degree of the pressure and the flow rate, maintaining the flow rate within 10 to 100% and the stability precision at + 2%.The pump is composed of two parts: the drive end and the fluid end ( the pump head).The transportation flow is dependent on the stroke speed of the drive end, the diameter of the diaphragm ( the pump head) and the stroke length of the diaphragm. Whiel the pump is being absorbed in the stroke, the diaphragm would start to move backward and the pressure in the pump head would decrease immediately;
|
l/h |
(Mpa) |
|
(mm) |
(mm) |
(KW) |
(KG) |
JXM-A 2.25/1.2 |
2.25 |
1.2 |
36 |
1.2 |
DN8 |
0.37KW |
18 |
JXM-A 4.5/1.2 |
4.5 |
|
|||||
JXM-A 9/1.2 |
9 |
144 |
|||||
JXM-A 22/1.2 |
22 |
72 |
4 |
DN15 |
|||
JXM-A 44/1.2 |
44 |
144 |
|||||
JXM-A 85/1.0 |
85 |
1 |
72 |
6 |
|||
JXM-A 120/0.7 |
120 |
0.7 |
72 |
8 |
|||
JXM-A 170/0.7 |
170 |
144 |
6 |
||||
JXM-A 240/0.7 |
240 |
144 |
8 |
DN25 |
|||
JXM-A 315/0.5 |
315 |
0.5 |
144 |
8 |
0.55KW |
||
JXM-A 400/0.5 |
400 |
144 |
10 |
||||
JXM-A 500/0.5 |
500 |
180 |
* Flow rates up to 500L/H, pressure up to 12Bar
* Adjustment of flowrate from 0% - 100% while running or stopped
* Accuracy +/- 2% of 100% rated flow
* Mechanically actuated PTFE diaphragm
* Maximum temperature of pumped fluid: +10℃ - 40℃
* Maximum suction up to 2M
* Mechanical actuated diagragm design, easy operation and with the convenience maintanence
* Changeable eccentric drive, no leakage with security delivery
* Rugged construction designed to withstand tough environments
* Oil bath lubrication for all of drive components
* Various pump head material (PVC, PVDF, SS304, SS316 etc.) to meet different solution needs
* Available with the manual control and digital control model
* Manual stroke adjustment
* Stroke actuator with 4-20mA signal
* Digital controller with 4-20mA signal
A: We are factory, and our factory has the independent research and development capacity
A: Generally it is 3 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer sample but it must be paid
A: TT, LC. etc.....