AILIPU J-X series Plunger dosing pumps, High-pressure plunger pumps are primarily used in the oil, gas, petrochemicals and refineries industries. They work against high pressures that occur when pumping and conditioning crude oil and natural gas.The plunger pump product line can be customized to operate at pressures in excess of 10,000 psi (690 bar), flows up to 1,594 gpm,All pumps have been carefully designed with oversized bearings and heavy-duty components to provide years of operational life.
Main Specification
** The capacity up to 200 LPH
** The maximum pressure up to 500 bar
** Measuring accuracy reaches to +/-1%
** Temperature of liquid can be more than 100 degree
** Max.suct: 8m
** SS 304 material pump head to meet strong demand
Main Features
** Piston metering pump
** The diameter of the piston can be very small, but can't be so large, normally 3-200mm can be acceptable
** Wide range discharge pressure, and can be makes as the high pressure pump
** No-leakage, use gasket as the seal
** No security leak equipment, safety valve is suggested in the discharge pipe
**Simple instruction, easy maintenance, and competitive price
Control
** Use stroke adjustment device can be reach the auto-adjust
** The changeable frequency of the motor can control the capacity flow, and remote control can be reached.
(L/h) | (Mpa) | (mm) | (mm) | (min-1) | (KW) | (mm) | (kg) | |||||||
J-X | 2J-X | 3J-X | J-X | 2J-X | 3J-X | 5-X | 25-X | 35-X | ||||||
□J-X□/50 | 0.8 | 1.6 | 2.4 | 50 | 4 | 20 | 72/96 | 0.55 | 0.75 | 0.75 | 4 | 25 | 30 | 48 |
□J-X□/32 | 0.8 | 1.6 | 2.4 | 32 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/50 | 1 | 2 | 3 | 50 | 0.55 | 0.75 | 0.75 | |||||||
□J-X□/25 | 1 | 2 | 3 | 25 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/50 | 1.3 | 2.6 | 3.9 | 50 | 5 | 0.55 | 0.75 | 0.75 | ||||||
□J-X□/20 | 1.3 | 2.6 | 3.9 | 20 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/50 | 1.6 | 3.2 | 4.8 | 50 | 0.55 | 0.75 | 0.75 | |||||||
□J-X□16 | 1.6 | 3.2 | 4.8 | 16 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/50 | 2 | 4 | 6 | 50 | 6 | 0.55 | 0.75 | 0.75 | ||||||
□J-X□/12.5 | 2 | 4 | 6 | 12.5 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/40 | 2.5 | 5 | 7.5 | 40 | 0.55 | 0.75 | 0.75 | |||||||
□J-X□/10 | 2.5 | 5 | 7.5 | 10 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/32 | 3.8 | 7.6 | 11.4 | 32 | 8 | 0.55 | 0.75 | 0.75 | 10 | |||||
□J-X□/8 | 3.8 | 7.6 | 11.4 | 8 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/25 | 5 | 10 | 15 | 25 | 0.55 | 0.75 | 0.75 | |||||||
□J-X□/6.3 | 5 | 10 | 15 | 6.3 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/20 | 6.3 | 12.6 | 18.9 | 20 | 10 | 0.55 | 0.75 | 0.75 | ||||||
□J-X□/5 | 6.3 | 12.6 | 18.9 | 5 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/16 | 8 | 16 | 24 | 16 | 0.55 | 0.75 | 0.75 | |||||||
□J-X□/4 | 8 | 16 | 24 | 4 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/12.5 | 10 | 20 | 30 | 12.5 | 12 | 0.55 | 0.75 | 0.75 | ||||||
□J-X□/3.2 | 10 | 20 | 30 | 3.2 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/10 | 13 | 26 | 39 | 10 | 0.55 | 0.75 | 0.75 | |||||||
□J-X□/2.5 | 13 | 26 | 39 | 2.5 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/8 | 16 | 32 | 48 | 8 | 16 | 0.55 | 0.75 | 0.75 | ||||||
□J-X□/2 | 16 | 32 | 48 | 2 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/6.3 | 20 | 40 | 60 | 6.3 | 0.55 | 0.75 | 0.75 | |||||||
□J-X□/1.6 | 20 | 40 | 60 | 1.6 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/5 | 25 | 50 | 75 | 5 | 20 | 0.55 | 0.75 | 0.75 | ||||||
□J-X□/1.3 | 25 | 50 | 75 | 1.3 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/4 | 32 | 64 | 96 | 4 | 0.55 | 0.75 | 0.75 | |||||||
□J-X□/1 | 32 | 64 | 96 | 1 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/3.2 | 40 | 80 | 120 | 3.2 | 25 | 0.55 | 0.75 | 0.75 | ||||||
□J-X□/0.8 | 40 | 80 | 120 | 0.8 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/2.5 | 50 | 100 | 150 | 2.5 | 0.55 | 0.75 | 0.75 | |||||||
□J-X□/0.63 | 50 | 100 | 150 | 0.63 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/2 | 63 | 126 | 189 | 2 | 32 | 0.55 | 0.75 | 0.75 | 15 | |||||
□J-X□/0.5 | 63 | 126 | 189 | 0.5 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/1.6 | 80 | 160 | 240 | 1.6 | 0.55 | 0.75 | 0.75 | |||||||
□J-X□/0.4 | 80 | 160 | 240 | 0.4 | 0.37 | 0.55 | 0.55 | |||||||
□J-X□/2 | 110 | 220 | 330 | 2 | 30 | 140 | 0.55 | 0.75 | 0.75 | |||||
□J-X□/1.6 | 125 | 250 | 375 | 1.6 | 32 | 0.55 | 0.75 | 0.75 | ||||||
□J-X□/1.3 | 160 | 320 | 480 | 1.3 | 35 | 0.55 | 0.75 | 0.75 | ||||||
□J-X□/1.0 | 200 | 400 | 600 | 1 | 40 | 0.55 | 0.75 | 0.75 |
A: We are factory, and our factory has the independent research and development capacity
A: Generally it is 3 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer sample but it must be paid
A:TT, LC. etc.....