JXM-A 22/1 Diaphragm Dosing pump
* Output pressure is less than 12bar, suitable for small flow. The measurement can be up to +/-1%
* It can Transport high-viscosity mediums, corrosive liquid and dangerous chemical goods
* Power-off seal, no leakage
*The flow can be controlled via adjusting the length of stroke or the motor frequency.
*Ambient temperature: -10~40
* Lower price, simple structure, convenient maintenance, better performance-price ratio
Capacity:2.5~500L/Hr
Pressure:5~12 bar
Speed:36~180 spm
Length of stroke: 1.2~10mm
Suction/discharge:DN8~DN25
Pump head material:PVC,PTFE,304,316
Diaphragm: PTFE
Motor Power: 220V /380V 0.37kw 1400rpm 3-50Hz IP55/F(others are available)
The JXM-A series of dosing pumps offer the high performance with the capacity up to 1200L/H and with outstanding values for pressure applications up to 12 Bar. This series dosing pump is designed for durability and cost effectiveness, which is welcome to be unsed in lots of lines, such as the water treatment, chemical, power, food and beverage, paper, textile etc.
|
l/h |
(Mpa) |
|
(mm) |
(mm) |
(KW) |
(KG) |
JXM-A 2.25/1.2 |
2.25 |
1.2 |
36 |
1.2 |
DN8 |
0.37KW |
18 |
JXM-A 4.5/1.2 |
4.5 |
|
|||||
JXM-A 9/1.2 |
9 |
144 |
|||||
JXM-A 22/1.2 |
22 |
72 |
4 |
DN15 |
|||
JXM-A 44/1.2 |
44 |
144 |
|||||
JXM-A 85/1.0 |
85 |
1 |
72 |
6 |
|||
JXM-A 120/0.7 |
120 |
0.7 |
72 |
8 |
|||
JXM-A 170/0.7 |
170 |
144 |
6 |
||||
JXM-A 240/0.7 |
240 |
144 |
8 |
DN25 |
|||
JXM-A 315/0.5 |
315 |
0.5 |
144 |
8 |
0.55KW |
||
JXM-A 400/0.5 |
400 |
144 |
10 |
||||
JXM-A 500/0.5 |
500 |
180 |
* Flow rates up to 500L/H, pressure up to 12Bar
* Adjustment of flowrate from 0% - 100% while running or stopped
* Accuracy +/- 2% of 100% rated flow
* Mechanically actuated PTFE diaphragm
* Maximum temperature of pumped fluid: +10℃ - 40℃
* Maximum suction up to 2M
* Mechanical actuated diagragm design, easy operation and with the convenience maintanence
* Changeable eccentric drive, no leakage with security delivery
* Rugged construction designed to withstand tough environments
* Oil bath lubrication for all of drive components
* Various pump head material (PVC, PVDF, SS304, SS316 etc.) to meet different solution needs
* Available with the manual control and digital control model
* Manual stroke adjustment
* Stroke actuator with 4-20mA signal
* Digital controller with 4-20mA signal