Specifications High Quality Single-stage Hammer Crusher Machine

1,High efficiency

2,Low operation cost

3.Easy maintenance

4.Long useful li

  High Quality Single-stage Hammer Crusher Machine Introduce   Single-stage Hammer Crusher is suitable for crushing brittle rock, such as limestone, argillaceous siltstone, shale, gypsum, coal and the mixture of limestone and clay. It is widely applied in cement making industry.   Specifications It is the maximum particle size of 600-1800 direct material crushing to 25 mm or 25 mm below the break with a broken machine.

Hammer crusher
1)High efficiency in hammering
2)Best after-sales sevice
3)ISO & SGS certificated
4)Durable wearing parts     2.Application of Hammer crusher

hammer crusher also named hammer mill, which is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc. The PC-Hammer crusher is suitable for both dry and wet crushing of brittle, medium-hard materials for the mining,coal, metallurgic, construction material, road building, and chemical industries. the maximum, compressive resistance of the crushed materials can be up 150Mpa. it crushes by the collisions between high-speed hammer and materials, has features of simple structure, high reduction ration, high efficiency, etc.   3.Features of Hammer crusher hammer crusher for coal crushing is a machine which is utilized to crush the coal, it is the most suitable to crush each brittle materials, like coal, gangue, coke, slag, red sandstone, shale, loose limestone, etc. The compressive strength of the material does not surpass 100MPa; the moisture content does not surpass 15%. It has the following features: saving the energy, guaranteeing the discharged material size, the higher production efficiency, the lower noise, the less dust and so on.  Otherwise, the discharge opening can be adjusted according to the customer’s requirements.     4.The operating principle of Hammer Crusher: Hammer crusher' s main part is the rotor (also called hammer head). The electric motor drives the rotor for high speed revolving in the stave cavity..The material goes into the machine body from the material mouth in upside,and is crushed because of the attacking, the impact, the cutting of the high speed movement's hammer. Under the rotor, there is a lamina cribrosa, the smashing material which is smaller than the size of mesh grade can discharge through the lamina cribrosa, the large size products are brought back to the crushed area by the hammers of the hammer crusher for being recrushed until they reached the required size.,then it will be charged from the lamina cribrosa.   Technical Parameters
 

Model	Max. Feed  Edge (mm)	Rotor Diameter (mm)	Rotor Hitting Width (mm)	Discharging Granularity(mm)	Capacity (t/h)	Motor  Power (kw)	Weight (t)	Remarks
Single-stage Hammer Crusher
PCF-1412	≤600	1420	1200	≤25~75	80~120	160~220	23.5
PCF-1616J	≤800	1620	1750	≤25~75	130~200	250~315	40.3
PCF-1616	≤800	1650	2100	≤25~75	220~240	315~355	43.3
PCF-1618	≤850	1650	2300	≤25~75	220~280	355~400	49.5
PCF-1818	≤900	1800	2000	≤25~75	240~350	400~560	70
PCF-2018	≤1000	2020	1802	≤25~75	350~450	630~710	89
PCF-2022	≤1000	2010	2230	≤25~75	400~600	710~800	111
PCF-2022(Ⅰ)	≤1200	2010	2230	≤25~75	400~600	710~800	121	With a feed roller
PCF-2022(Ⅱ)	≤1500	2010	2230	≤25~75	700~800	800~900	130	With two feed rollers
Double-rotor Single-stage Hammer Crusher
2PCF-1818	≤1000	1800	2000	≤25~75	700~1000	2×(630~710)	119
2PCF-2018	≤1000	2020	2200	≤25~75	1000~1200	2×(630~710)	138.5
2PCF-2022	≤1000	2020	2230	≤25~75	1200~1400	2×(800~900)	142.5
2PCF-2430	≤1200	2400	2800	≤25~75	1400~1800	2×( 900~1000)	232