Micro Duct Reducer Brief Introduction: The Push-Fit Reducers make splicing Micro Duct fast and easy. Simply push the Micro Ducts into the center of the coupling. No tools are required. The reducers can be connected and disconnected 10 times and still maintain the high performance requirements for air blown installation systems. Push-Fit Micro Duct Reducers operate at 15 BAR (218 psi) with a maximum permissible leakage rate of 1cc/min. This is equivalent to 1 bubble every 3 seconds. Higher pressures have been used in the field with no increase in leakage rate. Quick Burst rating is 25 BARS (363 psi). Product Picture: Technical Specification:
Material
Clear PC
Leakage Pressure:
15bar
Negative Pressure:
-750mmHg(10 Torr)
Proof Pressure:
25bar
Temperature Range:
-10~60°C
For Tubing Type:
PE, PU, Nylon, Polyurethane
Specification:
NO.
Model No.
For Tube OD(mm)
1
R5-3
5×3
2
R8-3
8×3
3
R8-5
8×5
4
R10-7
10×7
5
R10-8
10×8
6
R12-7
12×7
7
R12-10
12×10
8
R14-12
14×12
9
R16-12
16×12
Desigh Lifetime: The connector shall meet all performance requirements over a minimum period of 10 years at the normal condition.
Supplier Information
Shanghai Weibo Erguang Communication Equipment Co., Ltd.