Packaging: 20 Kgs /box, cakes wrapped with film that can be melted (1)21.5 TONS per 20feet container without plastic pallets (2)19.2 TONS per 20feet container with 10 plastic pallets
This kind of pressure sensitive hot melt adhesive designed for feminicare. With balanced performance in tack, holding power and peel strength, it can bond many kinds of substrates such as plastics, paper, cloth and so on.
Properties
Specification value
Test Method and equipment
Shape/Appearance
Light yellowish transparent in block
Visual
Solid Content
100%
Base
High polymer
Soften Point
75±5 degree
GB/T 15332 Softening point tester
Viscosity
700±150CPS at 160 degree
SNB-2 Digital Rotational Viscometer, 27# rotor test
Working temperature: 120-150 degree Method for clearing equipment: You can consult to the equipment manufacturer, or clean the equipment by clean mineral oil at 120 °C.After clean-up, flush it by the same hot melt adhesive not more than 170 °C. Safety Precautions: To Minimize the risk of burns, please wear protective clothing & Goggles when working near the glue machine/applicator.To minimize the danger of Flammable vapors, the temperature should be lower than 180°C . Prevent the built-up of vapors, extinguish all sources of ignition during the use of hot melt adhesive. End application: feminicare Certificate of Jaour: