Big Steel Intensity gold  jigger machine with ISO Approval Introduction of Jigger machine: Jigger machine is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Ladder Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for undersize fraction.   Jigger machine Application: Ore dressing of our Saw-tooth Wave Ladder Jig is capable of handling almost full sizes of mineral materials other than very fine material.   Jig Separator Working Principle Jig Separators are a kind of energy saving gravity equipment, development and improved on the basis of traditional jigs according to the the oretic layering law of jig beds. Their jigging pulsation curves take the shape of sawtooth waveform which gets the ascending water to travel more rapidly than the descending water. The ascending  time is short while the descending time is long. The problem that the ascending descending water flow and action time produced by sine wave and pulsation wave are the same is solved. The looseness of bed is strengthened and suction function is alleviated so that the heavy ore grains in the minerals are able to precipitate fully and the sorting ratio ability and recovery rate of equipment are largely improved.     Advantages of Jigger machine: Industrial tests carried our of Saw-tooth Wave Ladder Jig and Sine Wave Jig for comparison showed that the recovery rate for operation of Saw-tooth Wave Ladder Jig is raised by Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%; The water consumption reduces 30%-40% with water consumption being decreased by 30-40%. The area reduces 1/3 and the stroke may adjust also.   Jig Separator Features 1. large handling capacity 2. suitable for roughing and desliming 3. easy install, operation & maintenance 4. wide range of sorting particle size 5. strong adaptability to selected materials 6. good separation effects  of medium and fine grains 7. water saving, fewer 30-40% than the ordinary one 8. the pulsation speed is very easy be adjusted by regulator 9. fabricated with highest quality material, high recovery and efficiency 10. the pulsation curve is saw tooth wave shape facilitate heavy mineral to settling      Jigger technical parameters:

Model	Chamber		Feeding Size mm	Water added m3 /T	Pressure of water Mpa	Processing capacity t/h	Motor power Kw	Dimension mm	Weight Kg
	shape	Aream2
JT0.57-1	Ladder	0.57	<6	1-3	≥0.5	1-2.5	1.5	1550×780×1530	610
JT1-1	Ladder	1.04	<10	1-3		2-4	2.2	2270×1110×1890	900
JT2-2	Rect	2.28	<10	1-3		4-8	3	3225×1550×2050	1640
JT3-1	Ladder	3.3	<10	1-3	≥0.5	6-10	5.5	3180×2000×2600	3260
JT5-2	Ladder	4.86	<10	1-3		10-15	7.5	3600×2000×2600	4500
JT1.5-2	Rect	1.53	<30	1-2	≥0.5	5-8	3	3200×1550×2050	1520
JT4-2	Rect	4.33	<30	1-2		10-15	7.5	3600×1850×2600	4600

GHM are mine selection machines supplier from China, can supply different metal selection machines and equipments, such as hematite beneficiation line, limonite selection line, magnetite beneficiation line, copper ore selection line, zinc ore selection line, vanadium beneficiation line, etc.   Picture show: