Shenzhen Shumatt Technology Ltd.

Promotional PP2000 LEXIA-3 Interface works diagnosis Citroen and Peugeot

Basic Information
PP2000/LEXIA-3 Interface works for both Citroen and Peugeot   Peugeot PP2000 for querying , management function, programming and diagnosing, etc. 
Citroen PORXIA3, supports all models of Citroen, for programming, matching, diagnosing, etc.  
Latest software support to test all 2012 vehicles models, support the Peugeot 508
Test systems: ENGINE, automatic transmission, air conditioning system, SRS, ABS, ASR, MPL, GM, anti-theft system, OBD-II system, and so on.
Testing functions: read fault codes, clear the fault code, dynamic data stream , computer matching program, component testing, etc. It is the maintenance of Peugeot-Citroen car best helper 
Latest software version :
Citroen Lexia V48 
Peugeot PP2000 V25 (11A)    
Latest DIAGBOX 3 in 1 software, support testing the latest models 
DIAGBOX diagnosis system is Citroen and Peugeot universal of next-generation diagnosis program, it contains Diagbox, PPS, and LEXIA three sets diagnosis program, basically covers all Peugeot and Citroen models. 
Peugeot models: 106,107,205,206,207,306,307,308,309,405,408,407,408,508,605,607,806,807,1007,3008,4007,5008,ion,HOGGAR,RCZ,BIPPER,PARTNRT,EXPERT,BOXER etc. 
Citroen cars: CITROEN, Elysee,C-QUATRE, Picasso, Xsara and C-Triomphe ,AX,ZX,XM,BERLINGO,C1,C2,C3,C4,C5,C6,C8,C15,DS3,DS4,DS5, and so on.
Software update: upgrade free 1 year by CD or Email
Multi-language Support:
1.English, 2.German, 3. French, 4. Japanese, 5. Russian, 6. Spanish, 7. Portuguese, 
8. Swedish, 9. Turkish, 10. Dutch, 11. Polish, 12. Italian, 13. Hungary, 14. Greek, 15. Czec
Suggestion system: Windows XP   Supported Functions Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
The following diagnostic functions are supported:  
1. Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
7. Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit. Compatible Vehicles 1. Citroen cars including, C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 models.
2. Most Peugeot cars from 1995, but it can not work well with Peugeot 307.
If you has these two types of cars, please pay attention. Please check with us first before purchase.
Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001). 
Peug eot Bipper
Peug eot Boxer III
Peug eot Boxer III minibus
Citr oen Nemo
Citr oen Jum per III
Citr oen Jum per III minibus Description PP2000/LEXIA-3 Interface latest version, works for both Citreon and Peugeot!
Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.
This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
This item 100% works fine. It is tested by tens of users.   NOTE: Please don't try to disassemble the machine. No warranty if the machine is disassembled! Hardware and software requirements Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98/2000/XP with the latest service pack installed.
Packing List: 1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x 16pin to Clip Cable
1pc x Instruction for Installation and Activation DVD for PP2000   If you need the 30 pin code cable, you should pay an extra of 10usd for it! FAQ: Q: What is the way to do more cars?
A: You can choose the S.1279 module of PPS2000 Lexia-3 Citroen Peugeot and use with lexia-3 together. Then it can do more cars you want.   Instruction for Installation and Activation for PP2000
GO TO YOUR COMPUTER'S CONTROL PANEL
SET THE AREA/LANGUAGE TO USA/ENGLISH
START THE INSTALLATION
Activate after installation. The Key Gun is included in the software   Related professional diagnostic scanners (online shop mall with price, place order easily)           25. Ho nda GNA600 Diagnostic Interface http://www.densoautoac.com/?product-1021.html   26. Sca nia VCI 2 (karni and diesel vehicles, special detector) http://www.densoautoac.com/?product-275.html   27. PP2000/LEXIA-3 Interface works for both Citroen and Peugeot http://www.densoautoac.com/?product-264.html   28. TOY OTA Intelligent Tester2 IT2 toy ota professional diagnostic scanner http://www.densoautoac.com/?product-262.html   29. For d VCM IDS for Fo rd M azda Jag uar and Lan d Ro ver http://www.densoautoac.com/?product-258.html
Supplier Information
Shenzhen Shumatt Technology Ltd.
[ Guangdong China ]
More > Other products from this company
Post Buying Request