Specifications Monel 400 wire

Size: 0.1mm-8mm

Grade: Inconel 600, 625, 718, X-750, Hastelloy B,C276, INCOLOY800 etc.

special alloy Monel 400 wire
stype: wire, strip, bar, pipe, sheet
Grade: Inconel 600, 625, 718, X-750, Hastelloy B, C276, INCOLOY800

Product Category		Specification(mm)		Grade
Heat-resisting Superalloy Anticorrosion Alloy	Hot-rolled Bar	diameter (length of side)	Φ10~85 , 30~85	FN-2,RA333, A-286,V-57,Inconel706, Incoloy901,Incoloy903, Incoloy907, HastelloyX,Inconel600, Inconel625,HastelloyC-4, HastelloyB,HastelloyC-276,Inconel718,R26,Nimonic80A,Nimonic90,Nimonic93,Nimonic105,Nimonic118,Rene41,InconelX-750,C263, U720Li,Waspalloy,Hastelloy188,Hayness-25,BAT-45Y,AHB-300,GMR-235D,B-1900,In100,Rene100,In713C,TRW-VIA,In738,X-40,Incoloy800,Incoloy800H,Incoloy825,Alloy 20cb3,Inconel 600,Inconel 690,Hastelloy B,Hastelloy B-2,Hastelloy C,C276,Hastelloy C-4,Inconel 625
	Forged Bar	diameter (length of side)	Φ 90~250
	Hot-rolled Sheet	thickness×width×length	5.0~8.0×650~700×1000~2000
	Cold-rolled Sheet	thickness×width×length	0.8~4.0×700~1000×400~2000
	Cold-drawn -Steel	diameter             hexagon length of side	Φ8.0~35.0                     S 8.0~32.0
	Forged Shaft	diameter (length of side)	Φ 200~450
	Forged Disc	diameter (length of side)	Φ500~1000×≥100
	Forged Die Block	length of side mm	200~500
Precision Alloy	Cold-rolled Strip	thickness×width	0.03~3.0×≤300	Alloy1,AMS7717B,Alloy 3,Type 2,Alloy 4,Alloy 4,FeCrCo250,AMS5221C,ASTM F15,ASTM F29
	Hot-rolled Bar	diameter (length of side)	21~55
	Hot-rolled Flat Steel	thickness×width	3.5~13×≤300, 8~20×≤450
	Cold-drawing Wire	diameter (length of side)	0.1~8.0

      Characteristic as below:
Monel 400 is an extremely combination property that use for largest amount and most widely corrosion resistance alloy. This alloy in the hydrofluoric acid and fluoride gas medium with excellent corrosion resistance, as well as to the hot concentrated alkali. At the same time, is also corrosion resistant to neutral solution, sea water, air, organic compounds. An important feature of this is generally do not generate a stress corrosion cracking, good cutting performance. Monel 400 Metallurgical structure
Monel 400 alloy is high-intensity single-phase solid solution.     Monel 400 Corrosion resistance
Monel 400 alloy in the fluoride gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives have a very good corrosion resistance property, and possess better corrosion resistance more than the copper alloy in the sea water. Acid medium: Monel 400 have corrosion resistance in less than 85% consistency of sulfuric acid. Monel 400 is an important material that resistant to hydrofluoric acid. Water corrosion: Monel 400 alloy in most corrosion cases of water, not only excellent corrosion resistance, but also less pitting, stress corrosion, the corrosion rate less than 0.025mm / a. High temperature corrosion: Monel 400 for the work of the highest temperature at about 600 °C in general in the air, in the high temperature steam, the corrosion rate less than 0.026mm / a. Ammonia: Monel 400 can be resistant to an hydrous ammonia and aminate conditions corrosion below 585 °C due to the high nickel. Monel 400 alloy is a multi-purpose material in many industrial applications:
1. Seamless water pipe in the power factory
2. Sea-water exchanger and evaporator
3. Sulfuric acid and hydrochloric acid environment
4. Crude distillation
5. Sea-water in the use of equipment and propeller shaft
6. Nuclear industry and used in the manufacture of uranium enrichment isotope separation equipment
7. Manufacturing hydrochloric acid equipment used in the production of pump and valve