FEATURES 1.3-way Foil-Scrim-Kraft backing provides excellent reflection of both heat and light. 2.High quality adhesive with quper strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application. 3.Low moisture vapor transmission rate makes it an excellent vapor barrier. 4.Service Temperature range from -30~ +80°C( -22~ +176°F) TYPICAL PHYSICAL PROPERTIES
PROPERTIES | METRIC | ENGLISH | TEST METHOD |
Backing Thickness | 120 Micron | 4.8Mil | PSTC-133/ASTM D 3652 |
Total Thickness | 170 Micron | 6.8Mil | PSTC-133/ASTM D 3652 |
Adhesion to Steel | 25 N/25mm | 90 Oz./In. | PSTC-101/ASTM D 3330 |
Tack Rolling Ball | 15cm | 6.0In. | PSTC-6/ASTM D 3121 |
Tensile Strength | 120 N/25mm | 27.3Lb/In | PSTC-131/ASTM D 3759 |
Elongation | % | 1.0 | PSTC-131/ASTM D 3759 |
Service Temperature | -30~ +80°C | -22~ +176°F | -------- |
Applying Temperature | +10 ~ 40°C | +50~ +105°F | -------- |
TYPICAL APPLICATIONS: HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket/duct board joints and seams;joining and sealing flexible air duct seams and connections.May also be used for other industrial uses requiring a tape with these characteristics and benefits. PRODUCT FORM & SIZE AVAILABLE Cut Roll: 48/50mm(2")/60/63mm(2.5")/72/75mm(3")/96mm/100mm(4") Log Roll: 1200mm x 45/50m Jumbo Roll:1200mm x 750m/800m IMPORTANT NOTE: 1.The data above are typical values only,and should not be used for specifications purpose. 2.Tolerance:Weight and Thickness:±10%;Width:±3mm;Length:Long Roil:±0.3m,Jumbo Roll ±0.5%. STORAGE & SHELF LIFE: 12 months when stored at 21°C(70°F)/50% relative humidity out of direct sunlight. SURFACE PREPARATION: It is eaaential,as with all pressure-sensitive tapes,that the surface to which the tape is applied must be clean,dry,free of grease,oil or other contaminants. PRODUCT USE: It is essential that the user evaluate our product to determine whether it is fit for a particular purpose and user's method of application.Good results will be obtained when applied to a clean,dry surface with a suitable pressure on our products between +10 ~ +40°C(+50~+105°F)