Item | Parameter |
X axis stroke | 3000mm |
Y axis stroke | 2300mm |
Z axis stroke | 1350mm |
W axis stroke | 700mm |
Table work space | 1600mm*1800mm |
Table maximun loading capacity | 12000kg |
Table auto.Indexing | 0.001° |
X linear accuracy | 0.010/1000 |
Y linear accuracy | 0.005/500 |
Z linear accuracy | 0.010/1000 |
Positioning accuracy | ±0.005mm |
Repeatability accuracy | ±0.003mm |
Every 90°indexing | ±2" |
Optional angle | ±7" |
Spindle motor | 22kw |
Spindle speed | 5~2500rpm |
Gantry type machining center(HTM-6228G) | ||||
Item | Unit | Parameter | ||
Portal span | mm | 2800 | ||
Table work space | mm*mm | 6000*2500 | ||
Table maximum loading capacity | T | 30 | ||
T-slot width | mm | 30*28*200 | ||
Xaxis stroke | mm | 6200 | ||
Yaxis stroke | mm | 2800 | ||
Zaxis stroke | mm | 1000 | ||
Spindle to work table | mm | 1100-2100 | ||
Spindle taper form | BT50 | |||
Pull stud | p50T-2-MAS403 | |||
Spindle speed | rpm | 30-6000 | ||
Power of main motor | kw | 26/22 | ||
Rapid feed X/Y/Z | m/min | 10/15/15 | ||
Feed speed | m/min | 6 | ||
Min. feed rate | mm | 0.001 | ||
Tool storage capacity | 24,40 | |||
Max.tool diameter | mm | φ110(220),φ125(250) | ||
Max.tool length | mm | 400 | ||
Max.tool wenght | kg | 20 | ||
Tool change time | sec | 2.6 | ||
Numerical control system | FANUC18i-MB | |||
Positioning accuracy | mm | ±0.005/300 | ||
Repeat positioning accuracy | mm | ±0.003/1000 | ||
Complete machine capacitance | KVA | 65 | ||
Overall dimensions | mm | 15850*6420*5510 | ||
Weight of machine | T | 85.5 |