Genset | Brand | Calsion/Quanchai generator set |
Type | C31QS/CE35QS | |
Prime power( KW/KVA) | 25/31 | |
Standby power(KW/KVA) | 28/35 | |
Current(A) | 36/40 | |
Rate volt(V) | 400/230 | |
Rate frequence | 50Hz | |
Connection | 3 Phrase 4 Wire | |
PF | 0.8 | |
THD ≤% | 4% | |
Steady state volt variation ≤% | 0.5% | |
Steady state volt variation ≤% | +20% ~ -15% | |
Voltage recovery time | 1.0S | |
Voltage variation ≤% | 0.25% | |
Steady state frequency ≤% | 5% | |
Transient frequency ≤% | +10% ~ -7% | |
Frequency recovery time | 3.0S | |
Steady state frequency ≤% | 1.5% | |
Starter Mode | 24V | |
Dimension | 2400x1030x1500 | |
Weight kg | 1250 | |
Air Condition | GB1105,ISO3046 | |
Pressure | 100Kpa 1000m | |
Temperature C | 40 | |
Humidity % | 80 | |
Noise LeveldB A LP7M | 72 | |
Standard | GB/T2820.1,.5,.6 &ISO85282-1,-5,-6 | |
Engine | Engine Brand | Quanchai |
Model | QC4102D | |
Prime power KVA/KW | 41/33 | |
BorexStroke mm | 102×118 | |
Cylinder Number Arrangement | 4L | |
Displacement L | 3.857 | |
Compression Ratio | 17:1 | |
Engine Speed(rpm) | 1500 | |
Aspiration | Turbo charged | |
Flywheel shell interface | SAE 3# | |
Flywheel interface | SAE 11.5" | |
Flywheel gear | 130 | |
Fan Diameter | Φ450 | |
Fuel Consumption (g/W.h) | ≤240 | |
Minimum machine oil consumption (g/kwh) | ≤1.22 | |
Cooling Method | Fan & Radiator | |
Lubricating Oil Pan CapacityL | 15 | |
Governor | ECN | |
Alternator | Alternator brand | FARADAY |
Model | FD1G | |
Nominal rating (KW/KVA) | 25 / 31.3 | |
Exciter Type | SHUNT AREP or PMG | |
Alternator Type | Brushless | |
AVR | BASLER AVC63 | |
Protection Class | IP22 | |
Insulation Class | H | |
Pitch Winding | 2/3 | |
Overspeed | 2250rpm | |
Sustained Short Circuit Current | 300%(3In):2s | |
THF | <2% | |
Rated exotherm | 125 C | |
Control box | Control Module | DeepSea 3110 |