Nickel 270 Standard Grade Wire Mesh   1. Mesh Count: 60mesh/inch
2. Wire Diameter: 0.10mm
3. Width of Opening: 0.323mm
4. Open Area: 58.3%
5. Weight: 0.336kgs/m2 6. Width of roll: 3',3.2',4',5',6' 7. Length of roll: 100ft and 200ft 8. Packing: waterproof paper with plastic cloth,then wooden case.  

Specification list of Nickel 270 Wire Cloth
Mesh/Inch	Wire Diameter mm	Width Opening mm	Open Area %
50	0.170mm	0.338mm	44.2
60	0.101mm	0.322mm	57.8
60	0.152mm	0.271mm	41.0
60	0.177mm	0.246mm	33.6
75	0.152mm	0.186mm	30.3

  Material: Nickel 270 ( UNS  N02270 )   Type of Weave: plain   Standard Roll Widths: 36", 48",60"   Standard Roll Length: 100' or 30meters. Nickel 201 wire mesh – UNS N02201 Nickel 200 wire mesh – UNS N02200 Nickel 205 wire mesh – UNS N02205 Nickel 270 wire mesh – UNS N02270 Nickel 270 is a high purity grade of nickel made by powder metallurgy. It has a low base hardness and high ductility.
  Chemical Composition:

Chemical Composition %
C	Co	Cr	Cu	Fe	Mg	Mn	Ni	S	Si	Ti
0.02	0.001	0.001	0.001	0.005	0.001	0.001	99.97	0.001	0.001	0.001

  Physical Properties

Density	8.89 g/cm3
Specific Heat	440 J/kg K
Electrical Resistivity	8.5 micro ohms cm
Curie Temperature	358°C
Melting Range	1446°C
Thermal Expansion	(106K) 14.3 (20-300°C)

Mechanical Properties: Annealed:  400-500N/ mm2 Hard Drawn: 700 - 900 N/mm2 Service Temperature:  Tensile strength and elongation drop significantly at temperatures above
315°C (600°F). Service temperature is dependent on environment, load and size range. Applications: 1. Manufacture and handling of sodium hydroxide, particularly at temperature above 300C. 2. Production of viscose rayon. Manufacture of soap. 3. Alanine hydrochloride production and in the chlorination of aliphatic hydrocarbons such as benzene, methane and ethane. 4. Manufacture of vinyl chloride monomer. 5. Reactors and vessels in which fluorine is generated and reacted with hydrocarbons.