High abrasion resistant conveyor belt for stone, conveyor belt for stone cruher HUAYUE® conveyor belt can meet serious working condition. In addition to a range for normal bulk goods, various special types are available for conveying hot goods, for the transport of goods containing oil and grease, or steep-incline conveying and with special reinforcing materials for particular applications… Details of rubber conveyor belt : Structure of rubber conveyor belt 1. Plies: 1-10ply 2: width: 100-2200mm 3. Thickness: 5-30mm 4. Tensile Strength: 9-25MPA 5. High wear-resisting  

Fabric Material	Fabric structure		Fabric code	No.of fabric plies	Width mm	Length m	Cover thickness mm
	Warp	Weft
							Top	Bottom
Polyester canvas	Polyester	Nylon of Polyester	EP100	2-10	350-2000	10-400	2-12	1-5
			EP150	2-10	350-2000	10-400	2-12	1-5
			EP200	2-10	350-2000	10-400	2-12	1-5
			EP250	2-10	350-2000	10-400	2-12	1-5
			EP300	2-6	350-2000	10-400	2-12	1-5
			EP400	2-6	350-2000	10-400	2-12	1-5
			EP500	2-6	350-2000	10-400	2-12	1-5
			EP600	2-4	350-2000	10-400	2-12

  Usage: Rubber conveyor belt Used for transferring nubbly, grainy, and farinose things at a high speed in a middle and long distance with higher load. Standards: GB/T7984-2001, DIN22102, BS490, AS1332, RMA, JISK6322, SABS1173 etc.

Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply
DIN 22102	Mpa	%	mm3	N/mm	N/mm
				(<=1.5mm)	(>1.5mm)
DIN 22102-Z	15	350	250	3.5	4.5
DIN 22102-W	18	400	90	3.5	4.5
DIN 22102-Y	20	400	150	3.5	4.5
DIN 22102-X	25	450	120	3.5	4.5

 

Standards	Cover Rubber			Adhesion
	Tensile StrengTD	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
RMA	Mpa	%	mm3	N/mm	N/mm	N/mm
				(<=1.6mm)	(>1.6mm)
RMA-I	17	400		3	4.4	4
RMA-II	14	400		3	4.4	4

  types of rubber conveyor belt : Besides General EP Belt, there are Fire-retardant type, Cold-resistant type, Wear-resistant type, Heat-resistant type, Acid and alkaline resistant type, Oil-resistant type, Antistatic electricity type, High-grade type and Industrial coal mine conveyor belt etc.   The physical and mechanical properties: 1. The physical and mechanical properties of coverffig layer: please refer to the physical and mechanical properties of the common conveyer belt. 2. Tensile property of through thickness: a. The longitudinal tensile strength is not lower than the following nominal value: 315 400 500 600 630 800 900 1000N/mm b. The through thickness elongation rate of the belt should not less than rate of trough thickness of the belt should no more than 4%. c. Industrial coal mine conveyor belt Straightness: no more than 25mm. d. plunger bond strength:   Pictures of high quality endless conveyor belt : Work shop Inspetion Equipment Other Products