Qingdao HSMH International Trade Co., Ltd.

0.035 in. E71T-11 SELF SHIELDED FLUX CORED MIG WELDING WIRE

Basic Information
  Product Description   AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.   Shielding Gas:    Gasless Feature No Shielding Gas Needed
Single Pass Welding of Thin Gauge Galvanized Steel
Excellent for Outdoor Use
Smooth Arc & Minimal Spatter
DC- Straight Polarity
Works Well In Wind     Application   Self-shielded Flux Cored Welding Wire E71T-GS is most popular for the home workshop welder because it works so well on 110 volt machines and can be used on such thin gauge steel. Gasless Wire E71T-GS is used quite extensively in automobile bodyshops for door or body repairs and it is also used for sheet metal duct work on lap and butt joints.
NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.     Chemical Composition of deposited metal (%):  

Item

Mn

Si

P

S

A1

Ni

Standard

≤1.75

0.60

≤0.03

≤0.03

≤1.80

≤0.50

  Mechanical Properties Of Deposited Metal:  

Item

Yield Point

 

(MPa)

TensileStrength

 

(MPa)

Elongation

 

(%)

 
 

Standard

≥400

≥480

≥20

 

  Size and Recommended Current (DC-) and Voltage Range:  

Size

Voltage Range

Current (DC-)

Wire feed speed

 

0.8MM

16~18V

100~160A

30~60

0.9MM

16~19V

100~170A

30~65

1.2MM

16~20V

120~200A

35~70

  Procedures may vary with change in position, base metals, filler metals,equipment and other changes.   Available Diameters:   Dia(mm):    0.8       0.9        1.0        1.2    (inch)    0.030''   0.035''   0 .040''    0.045''   Packing:                          precision winding, heat shrinkable film and then packed in cartons.              0.9kgs/spool, 1kgs/spool: 1000cartons/ pallet              4.5kgs/spool ,5kgs/spool, 200cartons/pallet              15kgs/spool, 72cartons/pallet
Supplier Information
Qingdao HSMH International Trade Co., Ltd.
[ Shandong China ]
More > Other products from this company
Post Buying Request