2016 new type cutting saw / Double mitre saw in heavy duty for aluminum profiles cutting Performances and Features - Applying to sawing sorts of aluminum profiles for doors/windows and curtain walls by cutting at any angles between 22.5º- 90º. - High quality servo motors are adopted. LCD touching display screen for operating control, through which the cutting lengths and angles are inputted. The automatic positioning for profiles length and angle is available. - Saw-straight-outgoing mode, connected parallelly with hydro-pneumatic control system, so as to ensure the feeding stability of the saw blades at stepless speed. - The two sets of clamping cylinders clamp the profiles from two different directions horizontally and vertically, that makes the clamps more reliable. - Hard alloy blade, automatic cooling spray device - Attached holding rack makes clamping easier. - Automatic feeding and cutting, Standard Outfit Machine body and protective shield ---------------------------- 1 set Numerical servo system -------------------------------------------3 sets LCD system --------------------------------------------------------1 set Hydro-pneumatic damping system ------------------------------2 set Horizontal-vertical positioning device ------------------------- 2 sets Automatic cooling spray ----------------------------------------- 2 sets High precision leading screw shifting system ----------------- 1 set Attached holding rack -------------------------------------------- 1 set High precision sawing spindle ---------------------------------- 2 sets Specifications Cutting length: 480mm - 4500mm Profiles adaptable: 235mm 150mm (width x height) Blade size: 500 x 4 x 30 Power of main motors: 2.2kw x 2 Rotational speed of spindle: 2800 rpm Pneumatic working pressure: 0.5 0.8 MPa Air consumption: 0.2 cubic m/min. Dimensions: 5750 x 1300 x 1500mm Weight: 1500 kg Machining Precision Repetition on length: ± 0.1mm Repetition on angle: ± 5 Verticality of cutting surface: 0.1mm (100x100mm section) Planeness of cutting surface: 0.1mm (100x100mm section) Roughness of cutting surface: Ra12.5 µm