Zhangjiagang City Saibo Science & Technology Co., Ltd.

YX36-196-980 roofing panel roll Forming Machine

Basic Information
Specifications 1.high working efficiency&full automatically

2.we are the manufacturer

3.good after service

4:easy operation

YX36-196-980 roofing panel roll Forming Machine   1: Coil width: 1200mm effective width: 980±5mm 2: Roll forming speed: 30m/min (not contain cutting) 3: roll station: 24stations 4: material of roller: ASTM52100, polished and coated with chrome HRC58-60° HRC thickness: 4mm in the surface l Seller should be providing the material certificate to buyer for inspection. 5:material of main shaft: ASTM1045 diameter roller: 85mm 6: main power: 11KW AC motor adopt WEG brand which made in Nantong of China. 7: forming thickness: 0.4mm—0.8mm galvanized,galvalume steel, color steel or CR material 195Mpa-235Mpa. The 80% production is base on 0.43mm. Machine will be design base on 0.5mm. 8: Transmission: by single Chains 1.2 inch 9: feeding and guide: surface polished and coated with chrome 10: machine adopt protect cover, which is can removeable for easy adjust machine 11: machine adopts individual stations with chrome 12: size of machine: about 11300x1600x1400(mm) L x W x H need 1x40GP container, Main machine in two parts, joint by screw. 13: weigh of complete line: about 12000Kgs 14: color of machine: main body in Grey white, protect cover in yellow 15: machine should be with four legs (made from metal) in 350mm (joint by screw) 16.All of the cutting&welding must be clearly and smooth. 17.All of the painting and finishing must be in perfect 18.Compelte line total power about 30KW. 19: Cutting: (1) Motorized Pre-cutting: It is used when changing the coil of raw material; it can cut the coil rapidly and time-saving. Power: 1.5KW AC Motor which adopt WEG brand which made in Nantong of China. The controller must be in good quality. (2) Hydraulic Cutting after forming: Cut the sheet after roll forming to required length (3) Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start. (4) Material of blade: D3 with heat treatment HRC 60°±1.5°,Need to provide the certificate when inspection machine. (5) Length measuring: Automatic length measuring (6) Tolerance of length: 3m+/- 1.5mm
Supplier Information
Zhangjiagang City Saibo Science & Technology Co., Ltd.
[ Jiangsu China ]
More > Other products from this company
Post Buying Request