Specifications This machine adopts hydraulic track cutting, its speed can achieve 30m/min.

Specifications   This machine adopts hydraulic track cutting, its speed can achieve 30m/min. 

  The production flow of equipment
De-coiler feeding-guide-roll forming-straighten-post track cutting-manual out table
 
Feeding-guide-roll forming-straighten-post track cutting
Feeding
Armed adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattener.
Entrance table-guide: adjustable
Entrance width:35-130mm (according the final design)
Entrance and guide roller: diameter is ¢76mm, material is sae1045, HRC48-52° surface with chrome   Forming Section
Profile steel thickness 2.0-5.0mm
Main motor power: 22Kw, AC motor, side motor to save space (Brand: Siemens which made in China)
Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
Roll station:8stations +1 station of straighten
Roller material:Gcr15, 58-62,HRC hardness and chrome plated surface
Shaft diameter: ¢85mm   material: SAE1045  
Machine roll forming speed:0-30m/min
The min. Roll forming Speed: 0m/min
The maximal roll forming speed: 30m/min
Roll former has leveling bolts in the base for adjust the leveling
Machine base frame adopt H beam welding steel
In the main roll forming machine have 1 button for urgency stop if happen any malfunction.
Transmission: by gear box, joint with coupling, gear inside box structure is bevel gear
Machine stand adopt cast iron     Straighten device: 
one station after roll forming,
Function: for revise the end product up and down/ left and right to straightness
Roller material: Roller material: GCR15 quenched 58°-62°finishing turning CNC
Adjust by hand wheel
To avoid accidents, the drive parts will be covered by protective cover
 
Post track cutting system 
Cutting after forming: Cut the sheet after roll forming to required length
Cutting Type: hydraulic servo motor tracking cutting
Servo motor: 4kw
Material of blade:Cr12, 58-62 HRC hardness
Cutting power by hydraulic, 11KW with Storage tank
Working pressure: 25Mpa adjustable
Length measuring: Automatic encoder length measuring, brand: Omron
The cutting sequence is also contained and controlled by the same PLC program installed on the above.
Tolerance of length: 3000mm+/- 1.5mm
 
Hydraulic station:
Hydraulic power:11kw
Working pressure: 25Mpa adjustable
Solenoid valve: 1 group
Hydraulic oil: 46# hydraulic oil