LG-8.7/10 55KW 300 cfm power craft air compressor Product Introduction The operation of the economic cost
On the displacement 0-100% stepless adjustment is adopted in the system. Gas, small displacement with reduction, the motor current is reduced at the same time; When not gas, air compressor machine run idle, empty too long automatic stop. When the gas increases, the recovery heavy car. Optimal energy saving effects.
Good environment adaptability
Superior cooling system design, especially suitable for high temperature and high humidity environment in Asia. Vibration isolation technology and excellent noise reduction measures, make the first brand of screw air compressor installation without special foundation, as long as you set aside a minimum ventilation and maintenance space, you can place your compressor.
Screw rotor profile design features:
1.Fully realize "surface to surface", which helps to form hydrodynamic lubrication membrane, reduce through contact with transverse leakage, improve compressor efficiency; And improving the processing and inspection of the rotor performance.
2.Adopt "big rotor and bearings, low speed" design concept, speed is lower than other brands of 30 ~ 50%, and can reduce the noise and vibration, reduce exhaust temperature, improve the rotor rigidity, prolong service life, reduce the sensitivity to oil and impurities carbide.
3.4 ~ 355 kw power range, 18.5 ~ 250 kw are without gear box straight league, 200 kw and 250 kw direct connects the more 4 pole motor, low speed to 1480 r/min. 4.Fully meet or surpass GB19153-2003 "volumetric air compressor energy efficiency limit value, the requirements of national standard Advantages .High Efficiency .Reliability .Easy Maintenance .Economy of operation cost .Good environment adaptability Technique Parameter
Model | Working Pressure MPa | Capacity m3/min | Motor Power kW | Dimension mm |
LG-1.2/8 | 0.8 | 1.2 | 7.5 | 900×700×1040 |
LG-1.0/10 | 1.0 | 1.0 |
LG-0.8/13 | 1.3 | 0.8 |
LG-1.7/7 | 0.7 | 1.7 | 11 | 1060×800×1230 |
LG-1.7/8 | 0.8 | 1.7 |
LG-1.5/10 | 1.0 | 1.5 |
LG-1.2/13 | 1.3 | 1.2 |
LG-2.4/7 | 0.7 | 2.4 | 15 | 1060×800×1230 |
LG-2.4/8 | 0.8 | 2.4 |
LG-2.2/10 | 1.0 | 2.2 |
LG-1.7/13 | 1.3 | 1.7 |
LG-3/8G | 0.8 | 3 | 18.5 | 1420×850×1110 |
LG-3/7 | 0.7 | 3 | 1080×880×1415 |
LG-3/8 | 0.8 | 3 |
LG-2.7/10 | 1.0 | 2.7 |
LG-2.3/13 | 1.3 | 2.3 |
LG-3.6/8G | 0.8 | 3.6 | 22 | 1420×850×1110 |
LG-3.6/7 | 0.7 | 3.6 | 1080×880×1415 |
LG-3.6/8 | 0.8 | 3.6 |
LG-3.2/10 | 1.0 | 3.2 |
LG-5.2/7 | 0.7 | 5.2 | 30 | 1300×1100×1650 |
LG-5/8 | 0.8 | 5 |
LG-4.5/10 | 1.0 | 4.5 |
LG-3.7/13 | 1.3 | 3.7 |
LG-6.5/7G | 0.7 | 6.5 | 37 | 1630×910×1220 |
LG-6.2/8G | 0.8 | 6.2 |
LG-6.5/7 | 0.7 | 6.5 | 1300×1100×1650 |
LG-6.2/8 | 0.8 | 6.2 |
LG-5.6/10 | 1.0 | 5.6 |
LG-4.8/13 | 1.3 | 4.8 |
LGB-6.0/8 | 0.8 | 6.0 |
LGB-5.6/10 | 1.0 | 5.6 |
LGB-4.8/13 | 1.3 | 4.8 |
LG-7.4/7G | 0.7 | 7.4 | 45 | 1778×1000×1300 |
LG-7.4/7 | 0.7 | 7.4 | 1300×1100×1650 |
LG-7.1/8 | 0.8 | 7.1 |
LG-6.5/10 | 1.0 | 6.5 |
LG-5.6/13 | 1.3 | 5.6 |
LG-10.5/7G | 0.7 | 10.5 | 55 | 1950×1160×1550 |
LG-10/8G | 0.8 | 10 |
LG-7.5/13G | 1.3 | 7.5 |
LG-8.7/10 | 1.0 | 8.7 | 1620×1230×1670 |
LG-7.5/13 | 1.3 | 7.5 |
LGB-10/8 | 0.8 | 10 | 1500X1250X1566 |
LGB-8.5/10 | 1.0 | 8.5 |
Pictures
![](https://bsg-i.nbxc.com/uploads/e1/51/b6/ca6444098d5097096ba9f98f18.jpg)
Company Information We are air compressor producer with 15 years experience.our brand is KAISAHN brand, which have got ISO9001:2008 and many quality system certificate.Our main products including screw air compressor,reciprocating air compressor screw air end,rock drill,cylinder liner for combustion engine,and so on. Our products have its sale network throughout the country and the world,With its first-rate sales service,our company has its products exported to USA,Germany,Japan and Latin America over 60 countries and regions.
![](https://bsg-i.nbxc.com/uploads/2e/e6/60/69637e5b69399a2f69659fdd1f.jpg)
![](https://bsg-i.nbxc.com/uploads/6b/83/46/51deaabb0c6140577de73ec234.jpg)
Our Services After sale service is based on the principle of service. We will offer the “12380 ” service:
1: After receiving the customer mobile, we will help customer solve problem through
removing the resources of service and reply the customer clearly in one hours.
2: To improve the service quality all the time, in 2 working days of the end of on-sit service,
we will pay a return visit about the satisfaction of after sale service.
3: To comprehensive ,systematically and professionally maintenance and repair for the
customer product, we will have 3 times On-Site Inspection forwardly in warranty period.
8:The service engineer will solve problem in 8 hours after getting to on-sit. If the problem is
not solve ,the service engineer can not leave the on-sit.
0: To eliminate customer worries, from receiving order to product scrapping, we will provide
full reliance,seamless docking and service in the period of product using. Certifications
![](https://bsg-i.nbxc.com/uploads/de/47/7f/539be97656d488fffcda1b0010.jpg)
![](https://bsg-i.nbxc.com/uploads/b2/01/57/81f94ed7f6d7d5e0ab57ca8923.jpg)
cusomer's visit
![](https://bsg-i.nbxc.com/uploads/79/76/da/92e8085c3127a2914890daa8a3.png)