Specifications 1.Good Adhesion Epoxy Powder Coating Supplier;

2.Supply with excellent chemical resistance;

3.Competitive price.

 Product name: Good Adhesion Epoxy Powder Coating Supplier

Features:
1.Non-polluted, environment friendly, high efficiency;
2.It can be recycle used and can save resource;
3.Good leveling property;
4.Excellent coating for angle margin;
5.Good adhesion, dispense with first coat;
6.Excellent weather resistance and wearing resistance;
7.Good chemical and solvent resistance;
8.Good physical mechanical properties;
9.Wide range of coating color;
10.No by-products , without bubble and pinhole while curing.


 Product processing   Material blending-melting- hot extrusion- sheeting -cooling -chipping -grinding - sieving -- packing. material blending time shall follow the standard to avoid the chemical interreaction       Products series:   According to curing conditions, there are standard curing and lower temperature curing type;   According to gloss, there are different gloss level such as
high gloss ( above 85%),
flat gloss( 50%-85%),
semi gloss ( 7%-50%),
matt( below 7%)
and gloss can be adjusted according to customers requirements;   According to surface appearance, there are mainly three types, smooth effect, art textures effect including sandy, wrinkle, orange-figured, fissure hammer texture effect etc, and metallic effect.;

Available in all colors according to RAL & PANTONE and it can be customized as clients require

  Physical property:   Specific gravity: 1.4-1.7g/cm3 (varied with different color and gloss)   Particle size distribution 100%<100μm it can be adjusted .    Curing conditions:  Standard type: 180°C/15 minutes  Lower type:160°C/20 minutes
Special: 130°C/20 minutes if customer require   Coating performance:  

Test Item	Test standard and Method		Test index
Impact resistance	GB/T 1732 -1993	ISO6272	50kg/cm
Adhension(cross-cut)	GB/T 9286 - 1998	ISO2409	Class 0
Flexibility	GB/T 6742-1986	ISO1519	2mm
Pencil hardness	GB/T 6739-1996	ISO2815	1H-2H
Cupping test	GB/T 9753-1988	ISO1520	6mm
Salt spray resistance	GB/T 1771-1991	ISO7253	>400 Hours
Heat & humidity resistance	GB/T 1740-1979	ISO6270	>500 Hours film gloss slightly lose
Note: 1. Above test are using 0.30mm thickness degreased, rust removed cold rolling steel plate, film thickness is 60-80um.2. Film performance may slightly decrease with gloss decrease.

   
Health and Safety:   Safety:there are no hazardous ingredients in all the raw materials of powder coatings and no hazardous gas will be released while using. However,the inhalation of dusts should be avoided.An operateor should wear an anti-dust mask and try best to avoid long time contact with the powder coatings. Those coatings sticked on the skin could be washed with soap.