Input terminals: | Photo cell,Air wave switch, | Loop detector,Toll gate system . | Output terminals: | Motor,Lamp | Control board for 220V/DC Input terminals: | Photo cell,Air wave switch, | Loop detector,Back-up battery, | Toll gate system. | Output terminals: | Motor,Lamp | Functions: | Force of opening and Closing is adjustable. | Baisheng boom barrier trouble shooting : Number | Trouble | Cause | Shooting | 1 | Motor of Barrier does not work | 1,No power supply | 1,Check power supply | 2,Break fuse | 2,Change fuse | 3,Motor is damaged | 3,Change the motor | 2 | Barrier can open but can not close | 1,Photocell is not connected properly | 1,Connect the photocell | 2,Photocell beam is block off | 2,Clear out obstacle | 3,Photocell is broken | 3,Change a new device | 3 | Barrier can open (close) but can not close (open) | 1,Position of limit switch is not correct | 1,Adjust position | 2,Limit switch is damaged | 2,Change limit switch | 4 | Barrier can not locate accurately | 1,Distance of limit switch is too large | 1,Adjust position of limit switch | 2,Limit switch is wrong | 2,Change limit switch | 3,Magnetic-stell’s position is wrong | 3,Re-adjust the position | 5 | Release device of Barrier is doesn’t work | 1,Operating handle is broken | 1,Change the handle | 2,Worm gears are jammed | 2,Rotate the pinion | 6 | Push the “OPEN” button but the Barrier gate close | Whether “+MOTOR-” wires are connected wrong | Connect correctly according to wiring diagram | 7 | Motor of Barrier can work but boom can not work | Compression spring of clutch is dead | Change the spring | About us :
Supplier Information
Jiangxi Baisheng Gate & Door Automation Co., Ltd.
[ Jiangxi China ]
- Business Type : Manufacturer , Trade Company
- Product/Service : Gate & door automation equipment
- Tel : 15270782221
More > Other products from this company
|