Technical Data | |
Housing Size for auto barrier | 260x348x1050mm |
Housing color for the auto barrier | orange / blue/ yellow / red/Grey |
Housing Material for the auto barrier | steel top and housing |
Boom types for the auto barrier | retractable/straight/fence/foldable |
Boom lifting time | 2S-6S |
Boom length | 1-6m |
Rated Voltage | AC 220V (10%) 50Hz/60Hz, 110V (10%) 50Hz/60Hz |
Rated Motor power for the auto barrier | 90WAC/80W DC |
Weight | 65KGS |
Working temperature | -20oC-+55oC |
Protection grade for auto barrier | IP55 |
Number | Trouble | Cause | Shooting |
1 | Motor of the auto barrier does not work | 1,No power supply | 1,Check power supply |
2,Break fuse | 2,Change fuse | ||
3,Motor is damaged | 3,Change the motor | ||
2 | Auto barrier can open,but can not close | 1,Photocell is not connected properly | 1,Connect the photocell |
2,Photocell beam is block off | 2,Clear out obstacle | ||
3,Photocell is broken | 3,Change a new device | ||
3 | Auto barrier | 1,Position of limit switch is not correct | 1,Adjust position |
2,Limit switch is damaged | 2,Change limit switch | ||
4 | Auto barrier | 1,Distance of limit switch is too large | 1,Adjust position of limit switch |
2,Limit switch is wrong | 2,Change limit switch | ||
3,Magnetic-stell’s position is wrong | 3,Re-adjust the position | ||
5 | Release device of Barrier gate doesn’t work | 1,Operating handle is broken | 1,Change the handle |
2,Worm gears are jammed | 2,Rotate the pinion | ||
6 | Push the “OPEN” button but the barrier gate close | Whether “+MOTOR-” wires are connected wrong | Connect correctly according to wiring diagram |
7 | Motor of auto barrier can work, but boom can not work | Compression spring of clutch is broken | Change the spring |