Multi Function and High Quality AC DC TIG Welding Machine ALUTIG 200P
Product Description SPECIALIST FEATURE • DC+/DC-: Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.
• Lift-Arc start provides AC or DC arc starting without t • he use of high frequency.
• Adjustable AC output frequency allows the operator to focus the arc minimizing the heat affected zone.
• Extended AC Balance Control helps maintain a pointed tungsten to direct the arc in the weld joint.
• Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.
• Multiple Waveshapes:
Standard Squarewave for fast travel speeds and excellent puddle control;
Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action,;
Sine wave for a traditional softer sounding arc;
Triangular wave to reduce the heat input into the weld at low amperage.
• MIX TIG: we can get an excellent Arc Concentration, can be carried out the excellent welding performance from thin to thick plate. TECHNICAL SPECIFICATIONS
Item No | ALUTIG-200P | ALUTIG-200MV |
Rated Input Voltage | 1PH ~ 230V ±15% | 1PH ~ 115V/230V ±15% |
Max. Load Power Capacity | TIG: 5.62KVA | TIG: 4.55KVA |
| MMA: 6.60KVA | MMA: 5.33KVA |
Rated Duty Cycle(40℃) 60% | TIG: 200A/18V | TIG: 200A/18V |
| MMA: 160A/26.4V | MMA: 160A/26.4V |
100% | TIG: 160A/26.4V | TIG: 160A/26.4V |
| MMA: 130A/25.2V | MMA: 130A/25.2V |
Welding Current/Voltage Range | TIG: 5A/10.2V~200A/18V | TIG: 5A/10.2V~200A/18V |
| MMA:20A/20.8V~160A/26.4V | MMA:20A/20.8V~160A/26.4V |
Open Circuit Voltage | 70V~80V | 70V~80V |
Power Factor | 0.8 | 0.8 |
Efficiency | 80% | 80% |
TIG | Pulse | Peak Current | 5A~200A | 5A~200A |
Base Current | 5A~200A | 5A~200A |
Pulse Frequency | 0.2Hz~200Hz | 0.2Hz~200Hz |
Pulse Width (Ratio) | 1~100% | 1~100% |
AC TIG | AC Frequency Range | 20Hz~250Hz | 20Hz~250Hz |
AC Clean Width (AC Balance) | +40~-40 | +40~-40 |
AC Clean Ratio (AC Bias) % | +30~-50 | +30~-50 |
MIX TIG | MIX Frequency: | 1Hz~5Hz | 1Hz~5Hz |
DC Balance: (%) | 20-80 | 20-80 |
Arc-starting Current | 10A~160A | 10A~160A |
Crater-filling Current | 5A~200A | 5A~200A |
Current Up-slope Time | 0.1S~15S | 0.1S~15S |
Current Down-slope Time | 0-15S | 0-15S |
Pre-Gas Time | 0-15S | 0-15S |
Flow-Gas Time | 0-15S | 0-15S |
Spot Arc Time | 0-10S | 0-10S |
MMA | Arc Force | 10A~160A | 10A~160A |
Hot Start Time | 0.1~3S | 0.1~3S |
Hot Start Current | 10A-160A | 10A-160A |
Dimension (LxWxH) | 540X240X480mm | 540X240X480mm |
Weight (KG) | 23KG | 23KG |
MIX TIG CONTROL
Features of MIX TIG: The AC current can get a very good clearance, and DC current can get a deeper penetration. Use the MIX TIG we can get anexcellent Arc Concentration, can be carried out the excellent welding performance from thin to thick plate. 1) Nice weld appearance, deep penetration. 2) Excellet Arc Concentration. | | MIX TIG Frequency (Hz): the cycletime of MIX TIG in 1 second. Adjustable range: 0.1-10Hz. | | MIX TIG Balance (DC) %: DC Balance (%) = (tad/Tmix) x 100 | | AC WAVESHAPE CONTROLS | AC Frequency control control the width of the arc cone. Increasing the AC Frequency provides a more focused arc with increased directional control. Note: Decreasing the AC Frequency softens the arc and broadens the weld puddle for a wider weld bead. | | | AC Balance Control Controls arc cleaning action. Adjusting the % EN of the AC wave controls the width of the etchingzone surrounding the weld. Note: Set the AC Balance control for adequate arc cleaning action at the sides and in front of the weld puddle.AC Balance should be fine tuned according to how heavy or thick the oxides are. | | | Independent AC Amperage Control Allows the EN and EP amperage values to be set independently. Adjusts the ratio of EN to EP amperage to precisely control heat input to the work and the electrode. EN amperage controls the level of penetration, while EP amperage dramatically effects the arc cleaning action along with the AC Balance control.
| | Company Information COMPANY FAQ Q:Are you a factory or a trading company? A: We are factory with more than 10 years manufacturing experience and we provide perfect OEM and after-sale service.
Q:How can I pay my order? A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.
Q:How about your warranty? A: We offer 3-year product life guarantee ,and a generous 1 year warranty on al purchases that begins with the bill of lading.
Q: Do you have a CE certificate? A: For every model of machine, it has a CE certificate.
Q:How can I get the quotation? A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price,please send the message on trade management or call us directly.
Supplier Information
Hangzhou Broad Imp. & Exp. Co., Ltd.
[ Zhejiang China ]
- Business Type : Trade Company
- Product/Service : Welding Machines , Welding Accessories , Welding Consumables
- Tel : 13600516158
More > Other products from this company
| |