Specifications Use Anticorrosive Tape for

steel corrosion resistance,

steel corrosion protection,

corrosion protection coating

Anticorrosive tape, Anticorrosive tapes, Pipe corrosion protection tape System Description: The T-100 series is cold applied tape coating systems for the anticorrosion of underground, underwater, and overhead pipelines. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine. Product Advantages: Heavy duty adhesive. Conformable to irregular shapes. No release liner. Established in ground history. Complies with AWWA (American Water Works Association) C-214 standard. Compatible with general coating systems. T-100 Inner Tape (Anticorrosive tape, Anticorrosive tapes, Pipe corrosion protection tape) series Coating Systems with AWWA C-214 Standard: 

Type of the tape:		T-140		T-150		T-165		T-180		T-1100		T-1130
Thickness: (ASTM D 1000)	Total	mm	mil	mm	mil	mm	mil	mm	mil	mm	mil	mm	mil
		0.38	15	0.51	20	0.64	25	0.76	30	1.02	40	1.27	50
	Film	0.25	10	0.30	12	0.33	13	0.38	15	0.51	20	0.64	25
	Adhesive	0.13	5	0.21	8	0.31	12	0.38	15	0.51	20	0.63	25
Tensile:		27 lbs/in		31 lbs/in		34 lbs/in		39 lbs/in		53 lbs/in		66 lbs/in
Length:		60 Meter		50 Meter		40 Meter		30 Meter		25 Meter		20 Meter
Width:		2, 3, 4, 6, 9,12
Colour:		Black
Elongation:		300%
Peel Adhesion to Prime Pipe: (ASTM D 1000)		165 oz/in, 18N/10mm
Cathodic Disbandment: (ASTM G8)		0.25 in radius 6.4 mm
Water Vapor Transmission Rate: (ASTM F1249)		0.2g/100in2 /24h, 0.3mg/cm2/24h
Water Absorption: (ASTM D570)		≤ 0.1
Volume Resistively: (ASTM E257)		2.5 X 1012 ohm·cm
Dielectric Strength: (ASTM D 149)		40 KV
Temperature Range: (Normal in Ground Service)		-30 to 160 oF, -34 to 71oC