Specifications Polyethene is used as the base material which is cheap and effecient.

   Joint wrap tape: Polyethene is used as the base material which is coated by the liquid butyl rubber film, both of which are pressed and compounded. Usually its pe film is used on pipe joints, fabrications, bends, fitting and tie bars
Tapes specifications:
   1) T-365 with 0.65mm / 25mil thickness and 50 - 230mm width
   2) T-380 with 0.76mm / 30mil thickness and 50 - 230mm width
   3) T-3100 with 1.02mm / 40mil thickness and 50 - 230mm width
   4) T-3130 with 1.27mm / 50mil thickness and 50 - 230mm width
   5) Thickness: 0.40mm - 1.30mm
   6) Width can be 50mm, 75mm, 100mm, 150mm, 230mm
   7) Length: 30 - 200m Product Description The T-300 series is cold applied polyethylene tape coating systems for anti corrosion / anticorrosion of field joints, fittings, and specifically piping. Butyl Rubber Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.

Product Advantages:
Heavy duty adhesive.
Conformable to irregular shapes.
No release liner / release liner.
Established in ground history.
Complies with AWWA (American Water Works Association) C-214 standard.
Compatible with general coating systems.

T-300 Joint Tape Series Coating Systems with AWWA C-214 Standard

 

Type of the tape	T-365		T-380		T-3100		T-3130
Thickness (ASTM D 1000)	mm	mil	mm	mil	mm	mil	mm	mil
	0.64	25	0.76	30	1.02	40	1.27	50
Tensile:	31 lbs/in		31 lbs/in		41 lbs/in		52 lbs/in
Length:	40 Meter		30 Meter		25 Meter		20 Meter
Width:	2”, 3”, 4”, 6”, 9”,12”
Colour:	Black, White, Red, Blue, Purple, etc.
Composition:	Backing: low and high polyethylene & Adhesive: Butyl Rubber
Elongation:	300%
Peel Adhesion to Prime Pipe: (ASTM D 1000)	230 oz/in, 25N/10mm
Cathodic Disbandment: (ASTM G8)	0.25 in radius 6.4 mm
Water Vapor Transmission Rate: (ASTM F1249)	0.2g/100in 2 /24h, 0.3mg/cm 2 /24h
Water Absorption: (ASTM D570)	≤ 0.1
Volume Resistively: (ASTM E257)	2.5 X 10 12 ohm · m
Dielectric Strength: (ASTM D 149)	40 KV
Temperature Range : ( Normal in Ground Service)	-30 to 160 o F, -34 to 71 o C

More Product Features

HS Code:	39199090
Trademark:	nbIdeal
Model NO.:	T-300
Standard:	AWWA C214 Standard or SY0414-98/SY0414-93
Productivity:	6000, 000 Square Meter
Unit Price/Payment:	USA2/Square Meter
Origin:	China
Packing:	Carton
Min. Order:	10, 000 Square Meter
Transportation:	By Sea
Backing Paper (For Adhesive):	Polyethylene
Color:	Black, Etc
Surface Material:	PE
Efficacy (For Tape):	Other Special Use
Company:	Ningbo Ideal Anticorrosion Material (Anticorrosion Tape) Co., Ltd.