Specifications 1. Excellent sealing capabilities(thermal stability...)

2. A longer life and less maintenance under extreme conditions

Gasket Style Properties:  

Gasket Style	RS6-A	RS6-B	RS6-C	RS6-D
Sheet Construction
Without eyelet	500	500S	500T	500W
With inner eyelet	500 IR	500S IR	500T IR	500W IR
With outer eyelet	500 CR	500S CR	500T CR	500W CR
With I & O eyelet	500 IC	500S IC	500T IC	500W IC
Insert material	None	SS304, 316, CS	SS304, 316, CS	SS304, 316, CS
Insert material	None	Foil	Tanged	Mesh
Insert material	None	0.05 mm	0.1 mm, 0.25 mm-CS	0.1 mm

  Sheet Style Properties:  

Sheet Style	500	500S	500T	500W
Compressibility (%)	30	15~35	15~35	15~35
Recovery (%)	≥ 10	≥ 20	≥ 20	≥ 20
Pressure (Bar)	40	200	30	200
Density (g/cm3)	0.7;1.0	1.0	1.0	1.0
Temperature ( °C )	-240~550	-240~550	-240~550	-240~550
PH	0~14	0~14	0~14	0~14

          Various shapes are available, use din petrochamical, mining, vessels, boilers, piping and duct, pumps and valves, flanges etc. Suitable for steam, mineral oils, heat transfer oils, hydraulic oil, fuel, water, seawater, freshwater etc.   Graphite Properties:  

	Tolerance of density (g/cm^3)	C  ( ≥ %)	Tensile strength (Mpa)	Sulphur content (ppm)	Chlorine content (ppm)	Stress relaxation (%)
Industrial	-0.06~0.06	98	4	<1000	<50	10
Nuclear	-0.05~0.05	99.5	5	<700	<35	10

          It is made from graphite as homogeous, reinforced by metal mesh, foil or tanged metal. It offers excellent sealing capabilities such as thermal stability, self-lubrication, corrosion resistance, without being brittle and aging etc., under extrme conditions conditions with a longer life and less maintenance.   Dimension Standards:           The non-metallic gaskets are produced in several sizes and shapes to meet the most demanding applications. They are available in standard and non-standard gasket design. Non-standard means gasket of any shape and size according to customer design or sample.         The dimensions of our standard gaskets meet the requirements of the EN 1514-1(former DIN 2690, DIN 2691, DIN 2692), ANSI B 16.21 or other standards gaskets of up to 1500mmx1500mm are made from one piece, while larger ones are assembled from segments. Two kinds of splicing are used: dove-tail and bevelled (practucally there is no limitation regaiding gasket dimension). According to the gasket shapes and sizes, all other dimensions can be manufactured upon request.   If you are interested in our products and want to know more, please contact me! sales02 at rilson.com.cn