Specifications Aramid Fiber Packing

1.High quality aramid fiber

2.Impregnated with PTFE

3.Clean & widely used

4.4mm~50mm size

Aramid fiber packing is braided from high quality Dupont aramid fiber with PTFE impregnated and lubricant additive. It shows good chemical resistance, high elasticity and very low cold flow. It can resist severe media and higher pressure. The packing is lubricated with silicone based compound for quick and easy break-in.
SUNWELL P301L aramid fiber packing with insert lubricant
Without impregnation, an extremely durable, highly abrasive resistant packing. It is an idea for slurry service application. Aramid Fiber Packing Typical Application
> This is a universal packing which can be used for pumps in all types of industry.
> Chemical, petrochemical, pharmaceutical, food and sugar industries, pulp and paper mills, etc.
> A durable packing able to withstand granular and abrasive applications. Spiral Wound Gasket Prime Features
> It is wear resistant but may damage the shaft if not used properly.
> A minimum shaft hardness of 60HRC is therefore recommended.
> Superior performance
> Lower frictional factor Spiral Wound Gasket Technical Data

Material	Dupont Aramid Fiber (with or without PTFE impregnated)
Temperature Range	-100 up to +280 oC
Rotating	25 bar
Reciprocating	100 bar
Static	250 bar
Shaft Speed	25m/s
PH	2~12
Density	Appr. 1.4g/cm3

SUNWELL also has office brach called RGS in USA ,and more information of aramid fiber packing ,please feel free to conctact Sunwell.