Specifications it is special machine for curving the panel as special purpose

This machine is vertical style, so during curving long panel, the panel dont reshape because of self-weight. I, Technical parameters: Panel:          please check the profile drawing Material:      Thickness: 0.4-0.6mm, yield strength: Q250Mpa. Supporting Rollers Material:  Nylon. Shaft Material:  High grade 4# steel with quench and temper treatment. Motor Power:   Main motor: about 1.1Kw; Hydraulic motor: 2.2Kw(confirm after final design)   II, Working flowing: Feeding Panel(put the panel on the guiding platform, and push into feeding shafts, then can auto feeding)----setting length punching curving----take out the panel by manual.   III, Components

No.	Name	Qty	Note
1	Active feeding device	1set
2	Punching curving device	1set
3	Hydraulic system	1 set
4	Control system.	1set

  IV, Main Characteristic and parts 1,Main structure characteristic 1The shaft is 45# steel with quench and temper treatment, this increase the intension and rigidity. 2Main electric control parts are from Mitsubishi. 3Other main parts are top quality products in China. 4Adopting fully auto setting length punching curving, precise orientation, high quality products. 5Easy to install and adjust, low noise, high work efficiency. 2, Main parts introduction: Active feeding device has active feeding and measure function. Punching curving device: it consists of presser and punching die. Presser supply motivity and moving guiding rail to let the die can punching the panel with force calmly. During working, the encoder measure the length and send pulse to the control PLC which will stop the main motor, then begin the punching action cycle, after finishing, then the main motor will work to feed the panel, this the next cycle is begin. The hydraulic station supplies the motivity for the presser. Before start working, should check the hydraulic oil and whether the station work well. Hydraulic system: the hydraulic system supply pressure oil for the whole machine, this is easy to control.     Control system: it controls all action of the machine to let them work in phase. And also has man-machine interface to let user set required parameters. Such as panel blocks, panel length. And amend the error.