Carbon filled ptfe products

Basic Information

Model No.: Carbon filled ptfe products

Packaging: packed by plastic film firstly,then packed by plywooden case
Delivery Time: 7 Days
Place of Origin: Zhejiang, China (Mainland)
Brand: NXptfe

Specifications Carbon filled ptfe products

1.rod ,tube ,sheet ect

2.size as order

3. 5%,10%,15%,20%,25% Carbon filled

Carbon filled ptfe products

5% Carbon 10% Carbon 15% Carbon 20% Carbon 25% Carbon	Carbon has good chemical resistance to corrosive environments. It exhibits good initial wear and rubbing or sliding contact characteristics, both dry and water applications. It is frequently used in piston rings to reduce cylinder wall wear by entrapping abrasive foreign particles in their relatively soft surfaces.

5% Carbon

10% Carbon

15% Carbon

20% Carbon

25% Carbon

Carbon has good chemical resistance to corrosive environments. It exhibits good initial wear and rubbing or sliding contact characteristics, both dry and water applications. It is frequently used in piston rings to reduce cylinder wall wear by entrapping abrasive foreign particles in their relatively soft surfaces.

all the existing plastics, PTFE has the best corrosion-resistance and dielectricity.
Use of the products Lead insulating sleeve, corrosion-resistant pipe, and corrosion-resistant insulating
pipe for different corrosive conditions, heat exchanger.
Main technical indicator:Apparent

PTFE Material	Virgin PTFE blended with:
Filler	Carbon
Filler Content By Weight	15%
Specific Gravity	2.22
Tensile Strength	2,800
Elongation at Break	175%
Shore D Hardness	62
Breakdown voltage (kV/mm)	-

Carbon filled ptfe products density: 2.22~2.3(g/cm 3) offer : Carbon filled ptfe rod ,sheet ,tube ect size as order

we still offer the following products

10% Carbon-Graphite 20% Carbon-Graphite 25% Carbon-Graphite	These fillers are used both separately and together in PTFE compounds.
15% Glass Fiber, 5% Moly 20% Glass Fiber, 5% Moly, 5% Carbon-Graphite 23% Glass Fiber, 2% Moly 25% Glass Fiber, 5% Moly	These fillers are used both separately and together in PTFE compounds.
10% Glass Fiber, 10% Graphite 5% Glass Fiber, 5% Graphite 20% Glass Fiber, 5% Graphite	These fillers are used both separately and together in PTFE compounds.
10% Glass Fiber, 5% Carbon 5% Glass Fiber, 10% Carbon	These fillers are used both separately and together in PTFE compounds.
40% Bronze, 5% Moly 40% Bronze, 10% Moly 55% Bronze, 5% Moly	These fillers are used both separately and together in PTFE compounds.

10% Carbon-Graphite

20% Carbon-Graphite

25% Carbon-Graphite