Diamond Wire Saw Rope for Concrete and Reinforced Concrete
The quarrying wire is used mainly for cutting directly in the quarries or for squaring the blocks.
The diamond wire is essentially composed of three main components:
1. Steel cable with different diameter depending on the application.
The cable is formed by 7 secondary cables with different diameters depending on the type.
2. Electroplated or sintered diamond beads.
Bond and diamond studied for the material to cut.
3. Assembly with springs, rubber or plastic.
Protects the steel cable from the abrasive action of the stone and also absorbs the energy of the cutting.
Friction of the beads against the stone.
When place order of diamond cable please kindly informs:
1. The power and technical parameters of wire saw machine.
2. The hardness and chemical information of granite material, if possible.
3. The usual dimension of cutting bench, especially the working height.
4. Expected cutting performance in both speed and life.
5. Special requirement if any.
Diamond Wire Saws For Concrete |
Designed for concrete, reinforced concrete,and steel works, can be used for demolition of houses and bridges. cutting underwater steel tubes, cables, sunken ships. etc. |
Specification and performance parameters of wire saws |
Bead Diameter | Beads/Meter | Fixing Method | Application | Line Speed | Cutting Speed | Wire Life |
Ø 11.5 | 40 | Rubber+Spring | Highly Reinforced Concrete | 20~22 | 0.8~2.0 | 1.0~2.5 |
Ø 10.5 |
Ø 11.5 | 40 | Rubber+Spring | Normally Reinforced Concrete | 22~25 | 2.0~5.0 | 2.0~7.0 |
Ø 10.5 | 40 |
Ø 11.5 | 40 | Rubber+Spring | Steel/Metal structure | 18~20 | 0.5~1.0 | 0.5~1.2 |
Ø 10.5 | 40 |
Other specifications are available upon requirement.
|
Company Information
Certifications
Contact Us
Related Products