OBON frp flooring cement sandwich panels Product Description Choose the EPS wall panels best for your needs   OBON EPS (Expanded polystyrene board) wall Panel is composed of exterior panels and interior core filling, to form a non-load-bearing light-weight composite wall panel. The exterior panels on both sides are 5mm calcium silicate board, and the middle core is filled with polystyrene beads & cement or ceramsite, polystyrene beads & cement.    Product Specification 

Length (mm)	Width (mm)	Thickness (mm)	Applications	Appearance
2270 2440	610	60	1. Exterior & Interior Wall 2. Floor 3. Roofing 4.  Well pipe, fire control and equipment room 5. Ultra-high wall and Unique walls	1. 5mm calcium silicate board as face panel                                                                                                                    2.  EPS Polystyrene & Cement as core                                                                                                                              3.100% no asbestors                                                                                                                                                  4. Solid heart
		75
		90
		100
		120
		150
		180
		90 (half-Ceramsite)
		120 (half-Ceramsite)
		90 (With reinforcing bar)

    Advantages & Usages The advantages of using EPS wall panels   There are many advantages to using this solution instead of other conventional methods  (bricks/concrete block) for building housing without sacrificing any quality.   a, Eco-friendly and energy saving All the raw material is 100% free of harmful and A grade radioactive substances, which corresponds the national standards GB6566-2001. It is highly recommended by the government.
b, Fireproof Against high temperature of 1000 degrees Celsius for more than 4 hour of fire resistance test,  it did not emit toxic gases.   c, More Space: Increases a building’s useable area The usable area, or floor space, of a house built using the panels is larger than the same house would be if it was built with standard brick walls.   d, More stronger: High Strength & Durability with Impact Resistance OBON wall panel is with high strength and good impact resistance, which could be used as the partition wall in multi-layer and long-span building. The overall seismic performance is 10 times higher than ordinary masonry wall.   e, Moisture-proof and water proof Both sides of the panel are specialized waterproof board with high moisture resistant, which can be used for kitchen, bathrooms, basements and other wet areas.   f, Sound insulation The sound insulation for 90mm OBON panel is 42dB. The sound insulation for OBON panel conforms to our national standard and it is better than the traditional brick wall.   g, More Faster: Easy construction, High efficiency and Time saving As it is assembling construction, if for lower than 4 meters high wall, a skilled worker can assemble more than 35square meter per day by three people working in a group. What is more, both sides of the wall will not require for plastering, the working efficiency is 15 times faster than traditional construction. h, Heat insulation and warm preservation It can automatically adjust the indoor moisture content by the change of the season and climate, to make it possible to adjust the temperature in ecological regulation. i, Walls can be slotted, wired,nailed, hanged, painted and pasted OBON wall panel can be slotted, wired, nailed or put expansion anchor bolt for hanging such as air conditioner. The maximum single hanging force is 45kg.   j, More cheaper: Lightweight, economy, and can be recycled    The weight for the 75mm OBON panel is only one seventh of the traditional 120mm brick wall, which reduces the cost on the structure.     Product  Usages   Our panel can replace construction materials such as red bricks, clay solid bricks, air bricks, color-coated steel sandwich boards, gypsum blocks, wire spatial grid structure perlite boards, and perlite porous board.   It has been widely applied to wall materials of various high and low buildings such as banks, office building, hospitals, schools, hotels, malls, amusement halls, active barracks, old houses reconstruction, residences, and workshops.      Project Cases         Flow & Installation  Production Flow and Installation Procedures   Company Information  Company Introduction OBON Corporation's business scope from manufacturing, to domestic and international trade, project engineering, and finance service. Involving in the exploitation and manufacture of new wall materials, OBON Corporation is a professional and high-technology enterprise.   The Headquarter of OBON is located in Xiamen, Fujian China. OBON has successfully established, equipped and manned three manufacturing basis in Quanzhou Fujian Province, Guanqiao Fujian Province, and Bishan Henan Province. Company Honor  we have received ISO9001:2008 quality management system, ISO ISO14001:2004(GB/T24001-2004) environmental management system, OHSAS 18001:2007(GB/T24001-2001) occupation health and safety management system certification and China Environmental labeling (CEC).   Packaging & Shipping  Packing & Shipping 
1. The most largest quantity: Nude packing 2. Free packing, normal pallet + packing belt  3. Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film  

Name	Model	Specification(mm)	single(Pc)			Load by 20'GP
			m³	Kg/pc	kg/sqm	Qty (pc)	sqm	KG	m³
EPS & Cement Sandwich Panel	QJFBT60L2270B610	2270*610*60	0.08	57	41	351	486	19927	28
	QJFBT75L2270B610	2270*610*75	0.1	64	46	279	386	17771	28
	QJFBT90L2270B610	2270*610*90	0.12	73	53	234	324	17173	28
	QJFBT100L2270B610	2270*610*100	0.14	79	57	207	286	16338	29
	QJFBT120L2270B610	2270*610*120	0.17	93	67	171	236	15865	29
	QJFBT150L2270B610	2270*610*150	0.21	104	75	135	187	14020	28
	QJFBT180L2270B610	2270*610*180	0.25	120	87	117	162	14095	29
	QJFBT90L2270B610C	2270*610*90      (half-Ceramsite)	0.12	86	62	234	324	20089	28
	QJFBT120L2270B610C	2270*610*120      (half-Ceramsite)	0.17	108	78	171	237	18469	29
	QJFBT90L2270B610B	2270*610*90 (With reinforcing bar)	0.12	89	64	234	324	20737	28

  Our Services What We Can Do for You?   Covering an area of 50000 square meters, we have over 400 employees including managerial personnel, engineers, architects, technicians, consultants and workers, to provide customers with technical support in construction, after-sales and other support services. The annual sales figure exceeds USD10, 000,000 and are currently exporting 35% of our production worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.