AI-7011D5 thermocouple pt100 transmitter with 4-20ma output                                                                                AI-7021D5  dual channel temperature transmitter signal isolator     ___________________________________________________________________________       I. Main Features:        AI-7021 provides two-channel transmitters or signal isolators. It has the following features: It provides 2 channels of configurable inputs, and supports multiple voltage, RTD, thermocouple inputs with auto reference junction compensation. If parallel connected to an external precise resistance, it accepts current signal input. Each channel has its own digital filtering and can adjust its filtering degree.  It generates two isolated current outputs, 4-20mA or 0 – 20mA. The range of retransmission output can be freely defined.  This model uses high performance hardware, which leads to greatly decreased temperature drift and interference among the two channels. As a result, this multi-channel instrument achieves the same measurement accuracy and anti interference ability as that of single channel instrument.  It generates digital adjusted current output without potentiometer, making the current output precise and stable.  The model is DIN rail mounted. Its width is only 22.5mm. The instrument can be easily configured by connecting to our E8 handset display.  Universal power supply of 100-240VAC or 24VDC.  ISO9001 and CE certified and meets EMC standards. Its power and all I/O terminals pass 4KV/5KHz EFT test and can work reliably under interference.       ___________________________________________________________________________
      II. Technical Specification:      

Input type	Thermocouple: K, S, R, E, J, T, B, N, WRe5-WRe26  RTD: Pt100, Cu50  Linear voltage: 0~20mV, 0~60mV, 0~100mV, 0~1V, 0.2~1V etc.
Instrument Input range	K(-50~+1300 ), S( ℃ -50~+1700 ), R( ℃ -50~+1700 ), T(  -200~+350℃), E(0~1000 ℃), J(0~1200℃), B(0  ~1800 ℃), N( -50~+1300℃), WRe5 ℃ -WRe26(0~2300℃),  Pt100(-200~+900)℃, Cu(-50~+150)℃ Linear Input: -9990~+30000 units defined by user.
Retransmission accuracy	0.3%FS ± 1 digit (including input and output error)
Output Specification	can be freely defined in the range of 0~22mA with maximum output voltage ≥11V
Temperature drift	≤0.015%FS /℃  (including the temperature drift of input and output)
Electromagnetic compatibility (EMC)	±4KV/5KHz according to IEC61000-4-4 (EFT); 4KV according to IEC61000-4-5.
Isolation withstanding voltage	voltage between power, signal input and output terminals ≥2300VDC; between inputs or 2 outputs ≥200VDC
Power supply	100~240VAC, -15%, +10% / 50Hz; or 24VDC/AC.
Power consumption	≤3W
Operating Ambient	Temperature -10~+60℃; humidity ≤90%RH
Note 1: B thermocouple obtains the above measurement accuracy only at the range of 400~1800℃ .  Its measurement from 60~400℃ is less accurate.

      ___________________________________________________________________________        III. Front panel and Operation:   The parameters of AI-7021D5 can be set by an external E8 display which can be used to configure AI-7021D5 at the initial set up, as well as remain connected to AI-7021D5 and serves as an external display.
The functions of the parts of E8 external display panel is as below:        1. Upper display window, displays PV of channel 1 or parameter code, etc.           when display keep flashing or the reading abnormal, please check the input specification set correct or not.      2. Lower display window, displays PV of channel 2 or parameter value.           When display keep flashing or the reading abnormal, please check the input specification set correct or not.      3. Setup key, for accessing parameter table and conforming parameter modification.      4. Data shift key.      5. Data decrease key.      6. Data increase key.                                                                      (E8 handheld display)                                           (AI-7021D5) ___________________________________________________________________________         IV. Layout of Terminals and Indication Lights and Wiring:        Layout of AI-7021D5 indication lights and terminals is illustrated below:   Terminal 1 and 2 are for power supply of 100-240VAC or 24VAC/DC. Terminal 5 and 6 are the positive and negative pole of channel 1 current retransmission output. Terminal 7 and 8 are the positive and negative pole of channel 2 current retransmission output. Terminal 14~16 are for channel 1 input. Terminal 10~12 are for channel 2 input.   ___________________________________________________________________________
    Why choose Yudian? 1)Factory with 25 years experience. 2)Quick delivery ( within 3~5 working days). 3)Retail/Wholesale/OEM/ODM available .     We expect to cooperate with machinery manufacturers, better price for bulk order. 4)We provide after sales service and technical assistance as per the customers requirement and needs. FAQ 1. How long will you give me the reply?
we will contact you in 2 hours as soon as possible
2. Could I get samples?
Yes,we have products in stock ,so you can get the samples quickly.
3. How about the quality of temperature transmitter?
We have the certification of ISO,CE and ROSH,we could send the certification test of our company to you.
4. Could I visit your factory?
Of course,if you need we will help you to visit our factory.
5. If I have paid,when will you help me to produce?
We will start producing immediately after receiving the payment.